Covering Stoke-on-Trent and nearby
From shops and surgeries to schools, care homes and private houses, any building in the ST1, ST2, ST3, ST4 and ST6 postcode districts can be covered for drive unit replacement. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
City-centre entrances tend to be the busiest doors of all: shopping centres, stations, hospitals and office towers can see thousands of passes a day. In Stoke-on-Trent, that usually means heavy-duty operators, careful sensor set-up and servicing at intervals matched to the traffic.
Nearby towns we also list for drive unit replacement (straight-line distance): Newcastle-under-Lyme (2.0 miles), Kidsgrove (6.1 miles), Biddulph (7.8 miles), Leek (9.7 miles), Congleton (11.0 miles), Sandbach (12.2 miles).
What to think about for drive unit replacement in Stoke-on-Trent
- Older shopfronts in Stoke-on-Trent may have headers made for discontinued operators. Adapter plates usually allow a new drive unit to fit, which the survey confirms before you commit.
- Check the power supply. A dedicated fused spur and isolator near the door is usually needed, and older installations sometimes need electrical work before the new operator goes in.
- Hospitals and care homes in Stoke-on-Trent may need an alternative entrance during the changeover. Plan signs and step-free access for wheelchair users before work starts.
- Ask for the paperwork. A converted door should come with its risk assessment, Declaration of Conformity and user instructions, which belong with your building and maintenance records.
- Battery backup is easier to add with a new drive unit. It lets the door open or close safely in a power cut, which matters most on escape routes.
Drive unit replacement in Stoke-on-Trent: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £1,995 to £3,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| New drive unit on an existing automatic sliding door | £1,995 – £3,995 | existing leaves kept, installed, ex VAT |
| New operator on an existing automatic swing door | £1,795 – £3,995 | installed, ex VAT |
| Sensors replaced at the same time | £195 – £495 | per sensor, ex VAT |
Standards and rules in England
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Stoke-on-Trent.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Get in touch about drive unit replacement in Stoke-on-Trent. The door is surveyed free of charge and the changeover planned around your opening hours.
Drive unit replacement in Stoke-on-Trent: questions
Do you replace automatic door drive units in Stoke-on-Trent?
Yes. We are the contracting party for drive unit replacements in Stoke-on-Trent, and the survey and changeover are carried out by specialist engineers we manage. The survey is free and checks that the frame and leaves are worth keeping. You then receive a fixed, itemised quote for the new operator, sensors and any other parts the door needs.
What do you charge for drive unit replacement in Stoke-on-Trent?
Our guide is £1,995 to £3,995 excluding VAT (per door), the same guide prices we use across the UK. The free site survey in Stoke-on-Trent confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you fit a new operator to a door another company installed in Stoke-on-Trent?
Yes. We replace drive units on doors whoever fitted them. The survey identifies the existing header, leaves and track, and adapter plates usually let a new drive unit from one of the major European operator brands fit without changing the frame.
Do you provide paperwork for the converted door in Stoke-on-Trent?
Yes. When we fit a new drive unit we prepare the paperwork for the finished door, including the risk assessment, Declaration of Conformity and user instructions, and hand it over with the test results and settings. It belongs with your building records.
What does the written quote for drive unit replacement in Stoke-on-Trent include?
The quote lists each item separately: the door or equipment, installation, electrical connections where we provide them, removal of anything being replaced, testing and handover. It is a fixed price for the work described, so it does not change unless the scope changes, and any change is agreed with you in writing first.
What do you need from us for parking and access in Stoke-on-Trent?
Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.
Do businesses in Stoke-on-Trent have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.