Covering Gravesend and nearby
We do not keep premises in Gravesend. Instead, enquiries about sensor upgrades and replacement come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the DA12 postcode district on a date that suits the site.
Council offices, libraries, leisure centres and other public buildings in Gravesend usually buy through procurement rules. Itemised written prices, method statements and the paperwork a buyer needs can all be provided, and the work is carried out by specialist engineers working under our management.
Nearby towns we also list for sensor upgrades and replacement (straight-line distance): Northfleet (2.0 miles), Grays (3.0 miles), Strood (5.7 miles), South Ockendon (5.9 miles), Stanford-le-Hope (6.2 miles), Dartford (6.8 miles).
What to think about for sensor upgrades and replacement in Gravesend
- Shiny, wet or newly polished floors can confuse infrared safety sensors. Mention any recent floor changes at your building in Gravesend so the zones can be set for the new surface.
- If several doors at one site have the same old sensor, replacing them together keeps the doors behaving consistently and may reduce the cost per sensor.
- Care settings in Gravesend often need longer hold-open times and wider safety zones for residents who move slowly, use walking frames or pause in the doorway.
- Sites in Gravesend that open early or close late may want sensor work done outside trading hours. Tell us the quieter times when you book the visit.
- Corridor doors that people walk past rather than through may work better on a touch-free switch than a motion sensor, cutting needless openings and heat loss.
Sensor upgrades and replacement in Gravesend: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £195 to £495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Touch-free switch or push pad | £145 – £395 | per switch, ex VAT |
| Side-screen or light-curtain protection | from £295 | per door, ex VAT; on survey |
Sensor prices cover the part, fitting and set-up. If a sensor is fitted on a visit of its own, the visit charge (from £95 ex VAT) is added, and we confirm the total in writing before an engineer attends. Each sensor is set up for the door and tested before the engineer leaves.
Standards and rules in England
No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.
How it works
- Explain the problem. Whether the door is stuck, slow, noisy or due its next check, a short description and a few photos tell us which kind of visit to book for sensor upgrades and replacement and what to bring.
- Visit cost agreed. You get the visit price in writing before we book the engineer. There are no hidden extras: parts and further work are always quoted separately and in advance.
- Engineer on site. The engineer inspects the operator, sensors, tracks and leaves, carries out the repair or service, and runs the door through its safety tests before it goes back into use.
- Follow-up quoted. You are sent a record of the visit. If something else needs attention, we quote it in writing; for doors on a service plan, the next visit date is noted on the record.
For doors that open for passers-by or close too soon in Gravesend, talk to us about new sensors and detection zones set for your entrance.
Sensor upgrades and replacement in Gravesend: questions
Can you upgrade sensors on an old door in Gravesend?
Most older doors can take modern sensors. A few very old controllers cannot monitor current safety sensors. If yours is one of them, we explain whether a controller upgrade or a new drive unit is the better option, and quote it, before any work is done.
What price range should I expect for sensor upgrades and replacement in Gravesend?
Our guide is £195 to £495 excluding VAT (per sensor fitted), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Gravesend, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Do engineers carry sensors for doors in Gravesend?
Engineers carry common combined and safety sensors, so many replacements can be fitted at the first visit. Light curtains and specialist sensors are ordered once the door is identified, with delivery typically 1 to 2 weeks. Photos in advance help us bring the right part first time.
Do you replace automatic door sensors in Gravesend?
Yes. Sensor replacement and upgrades in Gravesend are booked and managed by us and carried out by engineers who specialise in automatic doors. They work on sensors for sliding, swing, folding and revolving doors from most makers. The visit cost is set in writing before they attend, and each new sensor is tested before they leave.
What if a door in Gravesend is found to be unsafe?
The engineer explains the problem and, where needed, leaves the door in a safe state, for example switched off or set so it cannot trap or strike anyone. You receive a written note of the issue. The repair or upgrade that would put it right is quoted before any further work is carried out.
Can you take over servicing of doors in Gravesend from another company?
Yes. Send us the door details and, if you have them, previous service records or inspection reports. The first visit gives a baseline for each door, and its price is agreed in writing beforehand. From then on, records continue in one consistent format, whichever company looked after the doors before.
Who is responsible for automatic doors on escape routes in Gravesend?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.