Covering Bolton and nearby
Homes, businesses and public buildings throughout the BL1, BL2 and BL3 postcode districts can arrange sensor upgrades and replacement with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Bolton for the job rather than working from premises in town.
Housing providers and managing agents in Bolton look after communal entrance doors that are used day and night. Reliable closing, good security and a written service record are usually the priorities, along with door entry or fob systems tied into the operator.
Nearby towns we also list for sensor upgrades and replacement (straight-line distance): Farnworth (2.7 miles), Westhoughton (4.4 miles), Radcliffe (4.7 miles), Atherton (4.8 miles), Walkden (4.8 miles), Horwich (4.9 miles).
What to think about for sensor upgrades and replacement in Bolton
- Corridor doors that people walk past rather than through may work better on a touch-free switch than a motion sensor, cutting needless openings and heat loss.
- Care settings in Bolton often need longer hold-open times and wider safety zones for residents who move slowly, use walking frames or pause in the doorway.
- Shopping parades and older shopfronts in Bolton sometimes have low transoms or canopies that limit where a sensor can be mounted. The engineer checks height and angle first.
- After a near miss at a door in Bolton, keep a note of what happened and where the person was standing. It helps the engineer judge which zone the sensor failed to cover.
- Sites in Bolton that open early or close late may want sensor work done outside trading hours. Tell us the quieter times when you book the visit.
Sensor upgrades and replacement in Bolton: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £195 to £495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Touch-free switch or push pad | £145 – £395 | per switch, ex VAT |
| Side-screen or light-curtain protection | from £295 | per door, ex VAT; on survey |
Sensor prices cover the part, fitting and set-up. If a sensor is fitted on a visit of its own, the visit charge (from £95 ex VAT) is added, and we confirm the total in writing before an engineer attends. Each sensor is set up for the door and tested before the engineer leaves.
Standards and rules in England
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.
No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.
How it works
- Make contact. Phone, email or use the form. Tell us the type of door, what it is doing and whether it is safe to use, so the right visit for sensor upgrades and replacement can be planned.
- Written visit price. The cost of attending is agreed in writing before the visit is booked. For a planned service or inspection, the price per door and what each visit includes are set out at the same time.
- On-site work. The engineer, working under our management, checks the door from end to end, deals with the fault or the service, and tests every safety function and sensor setting before signing the door off.
- Report and quote. You receive a report of the findings. Where a repair, part or upgrade is recommended, it is quoted in writing so you can decide, and the door is left in a safe state if it cannot be used.
Get your door detecting people properly again. Contact us about sensor replacement in Bolton, with the visit cost confirmed before anyone attends.
Sensor upgrades and replacement in Bolton: questions
Do you replace automatic door sensors in Bolton?
Yes. Sensor replacement and upgrades in Bolton are booked and managed by us and carried out by engineers who specialise in automatic doors. They work on sensors for sliding, swing, folding and revolving doors from most makers. The visit cost is set in writing before they attend, and each new sensor is tested before they leave.
Is there a guide price for sensor upgrades and replacement in Bolton?
Our guide is £195 to £495 excluding VAT (per sensor fitted), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Bolton, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Do engineers carry sensors for doors in Bolton?
Engineers carry common combined and safety sensors, so many replacements can be fitted at the first visit. Light curtains and specialist sensors are ordered once the door is identified, with delivery typically 1 to 2 weeks. Photos in advance help us bring the right part first time.
Can a risk assessment in Bolton tell us which sensors we need?
Yes. A safety inspection tests each hazard zone and records where sensor coverage is missing or poor. The report then lists the sensors or light curtains needed, and we can quote those items exactly as listed, or you can pass the report to another competent installer.
How soon can an engineer get to Bolton?
We do not promise response times. When you book, we give you the earliest date we can offer and confirm it once the price is agreed. If the door is unsafe in the meantime, it is usually best to switch it off or set it to a safe mode, put up a sign and keep people clear of it.
How often should automatic doors in Bolton be serviced?
No law sets a fixed interval. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Site staff should also carry out simple regular checks and keep a record of them.
Which building regulations apply to a new automatic entrance in Bolton?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.