UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Sensor upgrades and replacement · County Antrim

Sensor upgrades and replacement in Newtownabbey

Not every sensor fault needs a new sensor. Engineers in Newtownabbey check the detection zone, mounting and wiring first, and only replace a sensor when adjustment will not fix it. Any parts are quoted to you before they are fitted.

Town
Newtownabbey
Area
County Antrim
Postcodes
BT36, BT37
Guide price
Typically £195 to £495 ex VAT
  • Visit price agreed in writing first
  • Parts quoted before fitting
  • Written record of every visit
  • Most makes of automatic door
  • England, Wales, Scotland and NI

Covering Newtownabbey and nearby

We cover the whole of the BT36 and BT37 postcode districts, along with nearby towns in County Antrim. You book each visit for sensor upgrades and replacement directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.

Weather matters for entrances that face open car parks, which is common on retail and business parks around Newtownabbey and elsewhere in County Antrim. Exposed doors can be pushed by wind and let heat escape, so draught lobbies, good seals and correctly set sensors are worth considering.

Nearby towns we also list for sensor upgrades and replacement (straight-line distance): Holywood (3.7 miles), Belfast (4.4 miles), Carrickfergus (5.6 miles), Dundonald (6.4 miles), Ballyclare (7.3 miles), Bangor (9.6 miles).

What to think about for sensor upgrades and replacement in Newtownabbey

  • After a near miss at a door in Newtownabbey, keep a note of what happened and where the person was standing. It helps the engineer judge which zone the sensor failed to cover.
  • If several doors at one site have the same old sensor, replacing them together keeps the doors behaving consistently and may reduce the cost per sensor.
  • Shopping parades and older shopfronts in Newtownabbey sometimes have low transoms or canopies that limit where a sensor can be mounted. The engineer checks height and angle first.
  • Shiny, wet or newly polished floors can confuse infrared safety sensors. Mention any recent floor changes at your building in Newtownabbey so the zones can be set for the new surface.
  • Care settings in Newtownabbey often need longer hold-open times and wider safety zones for residents who move slowly, use walking frames or pause in the doorway.

Sensor upgrades and replacement in Newtownabbey: guide prices

The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £195 to £495 ex VAT.

ItemGuide priceNotes
Add or replace a safety or activation sensor£195 – £495per sensor fitted, ex VAT
Touch-free switch or push pad£145 – £395per switch, ex VAT
Side-screen or light-curtain protectionfrom £295per door, ex VAT; on survey

Sensor prices cover the part, fitting and set-up. If a sensor is fitted on a visit of its own, the visit charge (from £95 ex VAT) is added, and we confirm the total in writing before an engineer attends. Each sensor is set up for the door and tested before the engineer leaves.

Standards and rules in Northern Ireland

BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.

No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.

How it works

  1. Report the fault or service. Let us know whether the door has failed, is behaving oddly or is simply due a service or safety inspection. A short video of the problem helps the engineer prepare for the visit.
  2. Agree the price first. Before anyone travels to Newtownabbey, the visit price is set out in writing. It is based on the door type, the work requested and the location, so you know the cost in advance.
  3. Diagnose, repair, test. On site, the engineer finds the cause and puts it right where the parts are to hand, or completes the planned service. Sensors, safety functions and emergency behaviour are checked before the door returns to use.
  4. Paperwork and next steps. A written record of the visit is left with you or sent afterwards. If parts must be ordered or more work is advisable, it is quoted separately and only goes ahead once you accept.

Ask for a price on new safety or activation sensors in Newtownabbey. Each one is set up for the door's hazard zones and tested before the engineer leaves.

Sensor upgrades and replacement in Newtownabbey: questions

Can you price new sensors for my door in Newtownabbey from photos?

Often, yes. Photos of the sensor, the door from both sides and the label on the operator cover usually tell us which sensor is needed and whether it suits the controller. We can then quote the sensor and fitting in advance, with the visit price confirmed before anyone travels.

How are prices worked out for sensor upgrades and replacement in Newtownabbey?

Our guide is £195 to £495 excluding VAT (per sensor fitted), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Newtownabbey, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.

Do you replace automatic door sensors in Newtownabbey?

Yes. Sensor replacement and upgrades in Newtownabbey are booked and managed by us and carried out by engineers who specialise in automatic doors. They work on sensors for sliding, swing, folding and revolving doors from most makers. The visit cost is set in writing before they attend, and each new sensor is tested before they leave.

Will new sensors stop false openings at our entrance in Newtownabbey?

Usually. Modern sensors can ignore cross traffic and detect only people moving towards the door, and the zone can be narrowed. If the entrance faces a busy street or catches heavy weather, the engineer may suggest a sensor that filters those conditions better.

Can you take over servicing of doors in Newtownabbey from another company?

Yes. Send us the door details and, if you have them, previous service records or inspection reports. The first visit gives a baseline for each door, and its price is agreed in writing beforehand. From then on, records continue in one consistent format, whichever company looked after the doors before.

Which makes of automatic door can you work on in Newtownabbey?

Engineers working under our management work on most makes of automatic door, including sliding, swing, folding, telescopic and revolving types. Some older or obsolete operators have limited parts availability. If that applies, we explain the options, which may include a replacement drive unit on the existing frame, and quote them before anything is ordered.

Which accessibility law applies in Newtownabbey?

In Northern Ireland the Disability Discrimination Act 1995 applies, because the Equality Act 2010 does not extend there. Service providers and employers are expected to make reasonable adjustments for disabled people, and an automatic door is a common one at entrances.

Next step

Sensor upgrades and replacement in Newtownabbey

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.