Covering Carrickfergus and nearby
Our coverage of Carrickfergus takes in the BT38 postcode district and the neighbouring parts of County Antrim. If your address sits close to a boundary, it is still covered: send the postcode with your enquiry about sensor upgrades and replacement and we will confirm the arrangements and the price in writing.
Doors at quieter sites in Carrickfergus and elsewhere in County Antrim can go many years between checks. A safety inspection looks at how the sensors, closing behaviour and emergency functions are working, and gives you a written record to keep on file.
Nearby towns we also list for sensor upgrades and replacement (straight-line distance): Newtownabbey (5.6 miles), Ballyclare (8.1 miles), Dundonald (8.6 miles), Larne (9.3 miles).
What to think about for sensor upgrades and replacement in Carrickfergus
- Doors with side screens may need a light curtain on the leaf edge or post to protect the gap. This is one of the most common upgrades on older sliding doors.
- Shiny, wet or newly polished floors can confuse infrared safety sensors. Mention any recent floor changes at your building in Carrickfergus so the zones can be set for the new surface.
- After a near miss at a door in Carrickfergus, keep a note of what happened and where the person was standing. It helps the engineer judge which zone the sensor failed to cover.
- Swing doors in narrow corridors need sensors on the leaf to protect people on both sides. The engineer checks the swing path and any walls or fittings close by.
- If several doors at one site have the same old sensor, replacing them together keeps the doors behaving consistently and may reduce the cost per sensor.
Sensor upgrades and replacement in Carrickfergus: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £195 to £495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Touch-free switch or push pad | £145 – £395 | per switch, ex VAT |
| Side-screen or light-curtain protection | from £295 | per door, ex VAT; on survey |
Sensor prices cover the part, fitting and set-up. If a sensor is fitted on a visit of its own, the visit charge (from £95 ex VAT) is added, and we confirm the total in writing before an engineer attends. Each sensor is set up for the door and tested before the engineer leaves.
Standards and rules in Northern Ireland
Workplace law (the Workplace (Health, Safety and Welfare) Regulations (Northern Ireland) 1993) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. How often a door is maintained should follow the manufacturer’s information and how heavily it is used.
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.
How it works
- Tell us what is happening. Describe the fault, or the service or inspection that is due, and send photos of the door and any label on the operator. Include the address in Carrickfergus and how much the site depends on the door.
- Visit price agreed in writing. We confirm the price of the visit in writing before an engineer attends. If the door can be priced from photos and its make and model, we say so at this stage.
- Engineer visit. A specialist engineer working under our management diagnoses the fault or carries out the service, then tests the operation of the door and its safety sensors before leaving the site.
- Findings and follow-up. You receive a written record of what was found and done. Any parts or further work needed are quoted in writing before they go ahead, and nothing is added without your agreement.
For doors that open for passers-by or close too soon in Carrickfergus, talk to us about new sensors and detection zones set for your entrance.
Sensor upgrades and replacement in Carrickfergus: questions
Will new sensors stop false openings at our entrance in Carrickfergus?
Usually. Modern sensors can ignore cross traffic and detect only people moving towards the door, and the zone can be narrowed. If the entrance faces a busy street or catches heavy weather, the engineer may suggest a sensor that filters those conditions better.
Is there a guide price for sensor upgrades and replacement in Carrickfergus?
Our guide is £195 to £495 excluding VAT (per sensor fitted), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Carrickfergus, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Can you price new sensors for my door in Carrickfergus from photos?
Often, yes. Photos of the sensor, the door from both sides and the label on the operator cover usually tell us which sensor is needed and whether it suits the controller. We can then quote the sensor and fitting in advance, with the visit price confirmed before anyone travels.
Will you record the sensor settings for our building in Carrickfergus?
Yes. The job report lists each sensor fitted, its position, the settings used and the test results. Keep it with your service records, as it helps future engineers and shows the door's safety set-up was checked after the work. The same details are useful if an insurer or inspector asks.
What should I tell you when reporting a fault in Carrickfergus?
The address, the type of door, what it is doing or not doing, when the problem started and whether it is safe to use. A photo of the operator label showing the make, and a short video of the fault, help a great deal. With that, we can agree the visit price in writing and send an engineer with the right parts where possible.
How soon can an engineer get to Carrickfergus?
We do not promise response times. When you book, we give you the earliest date we can offer and confirm it once the price is agreed. If the door is unsafe in the meantime, it is usually best to switch it off or set it to a safe mode, put up a sign and keep people clear of it.
Which marking should a new automatic door in Carrickfergus carry?
In Northern Ireland machinery carries the CE marking, with UKNI added where a UK body carried out the conformity assessment. The EU Machinery Regulation applies in Northern Ireland from 20 January 2027.