UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Sensor upgrades and replacement · Aberdeen and Aberdeenshire

Sensor upgrades and replacement in Peterhead

Shops, surgeries and offices in Peterhead rely on sensors that open the door in good time and keep people safe in the doorway. When they wear out, replacements are matched to the door's controller and set for the way people approach.

Town
Peterhead
Area
Aberdeen and Aberdeenshire
Postcodes
AB42
Guide price
Typically £195 to £495 ex VAT
  • Visit price agreed in writing first
  • Parts quoted before fitting
  • Written record of every visit
  • Most makes of automatic door
  • England, Wales, Scotland and NI

Covering Peterhead and nearby

If your building is in Peterhead, or anywhere in the AB42 postcode district, we can arrange sensor upgrades and replacement. Visits are booked with you in advance, timed around opening hours where that matters, and carried out by engineers who work under our management.

Libraries, health centres and council buildings in Peterhead still need accessible entrances, whatever their size. A single automatic door with a push pad or touch-free switch is often enough to give everyone easy access.

Nearby towns we also list for sensor upgrades and replacement (straight-line distance): Ellon (14.5 miles), Fraserburgh (15.3 miles), Inverurie (26.8 miles), Aberdeen (27.6 miles).

What to think about for sensor upgrades and replacement in Peterhead

  • Doors with side screens may need a light curtain on the leaf edge or post to protect the gap. This is one of the most common upgrades on older sliding doors.
  • Rain, snow and blowing leaves can trigger radar sensors over exposed doors. Some sensors filter weather better than others, which the engineer weighs up when choosing a replacement.
  • Shiny, wet or newly polished floors can confuse infrared safety sensors. Mention any recent floor changes at your building in Peterhead so the zones can be set for the new surface.
  • Entrances facing busy roads in Peterhead can see false openings from passing vehicles and cyclists. A sensor with direction detection and a tighter zone usually helps.
  • After a near miss at a door in Peterhead, keep a note of what happened and where the person was standing. It helps the engineer judge which zone the sensor failed to cover.

Sensor upgrades and replacement in Peterhead: guide prices

The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £195 to £495 ex VAT.

ItemGuide priceNotes
Add or replace a safety or activation sensor£195 – £495per sensor fitted, ex VAT
Touch-free switch or push pad£145 – £395per switch, ex VAT
Side-screen or light-curtain protectionfrom £295per door, ex VAT; on survey

Sensor prices cover the part, fitting and set-up. If a sensor is fitted on a visit of its own, the visit charge (from £95 ex VAT) is added, and we confirm the total in writing before an engineer attends. Each sensor is set up for the door and tested before the engineer leaves.

Standards and rules in Scotland

No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.

BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.

How it works

  1. Report the fault or service. Let us know whether the door has failed, is behaving oddly or is simply due a service or safety inspection. A short video of the problem helps the engineer prepare for the visit.
  2. Agree the price first. Before anyone travels to Peterhead, the visit price is set out in writing. It is based on the door type, the work requested and the location, so you know the cost in advance.
  3. Diagnose, repair, test. On site, the engineer finds the cause and puts it right where the parts are to hand, or completes the planned service. Sensors, safety functions and emergency behaviour are checked before the door returns to use.
  4. Paperwork and next steps. A written record of the visit is left with you or sent afterwards. If parts must be ordered or more work is advisable, it is quoted separately and only goes ahead once you accept.

For doors that open for passers-by or close too soon in Peterhead, talk to us about new sensors and detection zones set for your entrance.

Sensor upgrades and replacement in Peterhead: questions

Can a risk assessment in Peterhead tell us which sensors we need?

Yes. A safety inspection tests each hazard zone and records where sensor coverage is missing or poor. The report then lists the sensors or light curtains needed, and we can quote those items exactly as listed, or you can pass the report to another competent installer.

Can you give me a price for sensor upgrades and replacement in Peterhead?

Our guide is £195 to £495 excluding VAT (per sensor fitted), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Peterhead, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.

Can you price new sensors for my door in Peterhead from photos?

Often, yes. Photos of the sensor, the door from both sides and the label on the operator cover usually tell us which sensor is needed and whether it suits the controller. We can then quote the sensor and fitting in advance, with the visit price confirmed before anyone travels.

Do you replace automatic door sensors in Peterhead?

Yes. Sensor replacement and upgrades in Peterhead are booked and managed by us and carried out by engineers who specialise in automatic doors. They work on sensors for sliding, swing, folding and revolving doors from most makers. The visit cost is set in writing before they attend, and each new sensor is tested before they leave.

What should I tell you when reporting a fault in Peterhead?

The address, the type of door, what it is doing or not doing, when the problem started and whether it is safe to use. A photo of the operator label showing the make, and a short video of the fault, help a great deal. With that, we can agree the visit price in writing and send an engineer with the right parts where possible.

Can visits in Peterhead be arranged outside working hours?

Yes, where the site needs it. Early-morning, evening and weekend visits can be arranged for shops, surgeries and offices that cannot lose their entrance during the day. Any difference in price for out-of-hours attendance is agreed in writing before the visit is booked, alongside the standard visit price.

Who is responsible for automatic doors on escape routes in Peterhead?

The person responsible for fire safety under the Fire (Scotland) Act 2005 for those premises. Scottish guidance allows automatic doors on escape routes only where they fail safely to outward opening or have a monitored fail-safe system that opens them on power failure, sensor failure and fire alarm.

Next step

Sensor upgrades and replacement in Peterhead

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.