Covering Inverurie and nearby
We do not keep premises in Inverurie. Instead, enquiries about sensor upgrades and replacement come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the AB51 postcode district on a date that suits the site.
Many buildings in Inverurie are older, with timber frames, thick walls, steps or uneven thresholds. These affect where an operator and sensors can go, and the engineer checks them on site before anything is fitted or adjusted.
Nearby towns we also list for sensor upgrades and replacement (straight-line distance): Westhill (9.8 miles), Ellon (12.6 miles), Aberdeen (14.3 miles), Stonehaven (23.0 miles), Peterhead (26.8 miles), Keith (27.5 miles).
What to think about for sensor upgrades and replacement in Inverurie
- Entrances facing busy roads in Inverurie can see false openings from passing vehicles and cyclists. A sensor with direction detection and a tighter zone usually helps.
- Doors with side screens may need a light curtain on the leaf edge or post to protect the gap. This is one of the most common upgrades on older sliding doors.
- Corridor doors that people walk past rather than through may work better on a touch-free switch than a motion sensor, cutting needless openings and heat loss.
- Shiny, wet or newly polished floors can confuse infrared safety sensors. Mention any recent floor changes at your building in Inverurie so the zones can be set for the new surface.
- Sensor changes on escape route doors must never stop the door opening when it needs to. The engineer checks the door's escape mode after any sensor work.
Sensor upgrades and replacement in Inverurie: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £195 to £495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Touch-free switch or push pad | £145 – £395 | per switch, ex VAT |
| Side-screen or light-curtain protection | from £295 | per door, ex VAT; on survey |
Sensor prices cover the part, fitting and set-up. If a sensor is fitted on a visit of its own, the visit charge (from £95 ex VAT) is added, and we confirm the total in writing before an engineer attends. Each sensor is set up for the door and tested before the engineer leaves.
Standards and rules in Scotland
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.
No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.
How it works
- Report the fault or service. Let us know whether the door has failed, is behaving oddly or is simply due a service or safety inspection. A short video of the problem helps the engineer prepare for the visit.
- Agree the price first. Before anyone travels to Inverurie, the visit price is set out in writing. It is based on the door type, the work requested and the location, so you know the cost in advance.
- Diagnose, repair, test. On site, the engineer finds the cause and puts it right where the parts are to hand, or completes the planned service. Sensors, safety functions and emergency behaviour are checked before the door returns to use.
- Paperwork and next steps. A written record of the visit is left with you or sent afterwards. If parts must be ordered or more work is advisable, it is quoted separately and only goes ahead once you accept.
Upgrade the sensors on an older automatic door in Inverurie. Tell us the door type and what it is doing, and we will price the work in writing.
Sensor upgrades and replacement in Inverurie: questions
Will you record the sensor settings for our building in Inverurie?
Yes. The job report lists each sensor fitted, its position, the settings used and the test results. Keep it with your service records, as it helps future engineers and shows the door's safety set-up was checked after the work. The same details are useful if an insurer or inspector asks.
What is the guide price for sensor upgrades and replacement in Inverurie?
Our guide is £195 to £495 excluding VAT (per sensor fitted), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Inverurie, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Can you price new sensors for my door in Inverurie from photos?
Often, yes. Photos of the sensor, the door from both sides and the label on the operator cover usually tell us which sensor is needed and whether it suits the controller. We can then quote the sensor and fitting in advance, with the visit price confirmed before anyone travels.
Do engineers carry sensors for doors in Inverurie?
Engineers carry common combined and safety sensors, so many replacements can be fitted at the first visit. Light curtains and specialist sensors are ordered once the door is identified, with delivery typically 1 to 2 weeks. Photos in advance help us bring the right part first time.
What if a door in Inverurie is found to be unsafe?
The engineer explains the problem and, where needed, leaves the door in a safe state, for example switched off or set so it cannot trap or strike anyone. You receive a written note of the issue. The repair or upgrade that would put it right is quoted before any further work is carried out.
Are parts quoted before they are fitted?
Always. If a repair or service in Inverurie needs parts, such as rollers, belts, sensors, a control board or a motor, we quote them in writing first. Some common parts may be on the engineer's van; others are ordered once you accept the quote and fitted on a return visit at a price already agreed.
Do businesses in Inverurie have to fit automatic doors?
No law requires automatic doors everywhere. Under the Equality Act 2010 service providers and employers must make reasonable adjustments for disabled people, and Scottish guidance says powered doors improve accessibility at entrances. An automatic door is often the practical answer.