Covering Portadown and nearby
Homes, businesses and public buildings throughout the BT62 and BT63 postcode districts can arrange safety inspections and risk assessments with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Portadown for the job rather than working from premises in town.
Libraries, health centres and council buildings in Portadown still need accessible entrances, whatever their size. A single automatic door with a push pad or touch-free switch is often enough to give everyone easy access.
Nearby towns we also list for safety inspections and risk assessments (straight-line distance): Craigavon (2.8 miles), Lurgan (5.4 miles), Banbridge (8.2 miles), Armagh (10.3 miles), Dungannon (14.1 miles), Newry (17.4 miles).
What to think about for safety inspections and risk assessments in Portadown
- Schools and nurseries need particular care with finger traps at hinges and beside side screens, because children are more likely to put their hands into gaps.
- Shared entrances in office blocks and business parks in Portadown may serve several tenants. Agree who holds the report and who pays for upgrades before booking.
- Public buildings in Portadown, such as libraries and leisure centres, often have several doors of different ages. A whole-site inspection puts every door into one ranked report.
- If the use of a building has changed, for example a unit in Portadown that has become a clinic or a gym, the door's original set-up may no longer suit its users.
- Glass leaves need safety glazing and visible markings. Faded or missing manifestation is a common finding, and one of the quickest and cheapest to put right.
Safety inspections and risk assessments in Portadown: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £125 to £250 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Safety inspection and risk assessment, existing door | £125 – £250 | per door, written report, ex VAT |
| Inspection added to a service visit | reduced | quoted with the service |
| Upgrades found by the inspection | quoted separately | see safety and compliance upgrades |
The inspection price is agreed in writing before the visit. Any upgrades the report recommends are quoted separately so you can plan them.
Standards and rules in Northern Ireland
No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.
How it works
- Explain the problem. Whether the door is stuck, slow, noisy or due its next check, a short description and a few photos tell us which kind of visit to book for safety inspections and risk assessments and what to bring.
- Visit cost agreed. You get the visit price in writing before we book the engineer. There are no hidden extras: parts and further work are always quoted separately and in advance.
- Engineer on site. The engineer inspects the operator, sensors, tracks and leaves, carries out the repair or service, and runs the door through its safety tests before it goes back into use.
- Follow-up quoted. You are sent a record of the visit. If something else needs attention, we quote it in writing; for doors on a service plan, the next visit date is noted on the record.
Combine servicing and a safety inspection in Portadown in one visit. Contact us with your door details for a written price covering both.
Safety inspections and risk assessments in Portadown: questions
How long will our door in Portadown be out of use during the inspection?
Usually only for short periods while sensors are tested and the door is observed in different modes. A single door generally takes about an hour in total. For busy entrances the inspection can be planned for a quieter time, or one leaf tested at a time where the door allows it.
What price range should I expect for safety inspections and risk assessments in Portadown?
Our guide is £125 to £250 excluding VAT (per door), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Portadown, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Can an inspection in Portadown be combined with a service?
Yes, and it often makes sense. The engineer services the door, then carries out the risk assessment while on site, which saves a second visit. The combined price is agreed in writing before the visit, and you receive both the service record and the inspection report.
Do we have to use you for the upgrades the inspection recommends in Portadown?
No. The report is yours, and any competent installer can carry out the work. If you want us to do it, each upgrade is quoted separately and itemised, so you can phase the work and start with the high-priority items.
Which makes of automatic door can you work on in Portadown?
Engineers working under our management work on most makes of automatic door, including sliding, swing, folding, telescopic and revolving types. Some older or obsolete operators have limited parts availability. If that applies, we explain the options, which may include a replacement drive unit on the existing frame, and quote them before anything is ordered.
What should I tell you when reporting a fault in Portadown?
The address, the type of door, what it is doing or not doing, when the problem started and whether it is safe to use. A photo of the operator label showing the make, and a short video of the fault, help a great deal. With that, we can agree the visit price in writing and send an engineer with the right parts where possible.
Which marking should a new automatic door in Portadown carry?
In Northern Ireland machinery carries the CE marking, with UKNI added where a UK body carried out the conformity assessment. The EU Machinery Regulation applies in Northern Ireland from 20 January 2027.