Covering Fraserburgh and nearby
If your building is in Fraserburgh, or anywhere in the AB43 postcode district, we can arrange safety inspections and risk assessments. Visits are booked with you in advance, timed around opening hours where that matters, and carried out by engineers who work under our management.
Many buildings in Fraserburgh are older, with timber frames, thick walls, steps or uneven thresholds. These affect where an operator and sensors can go, and the engineer checks them on site before anything is fitted or adjusted.
Nearby towns we also list for safety inspections and risk assessments (straight-line distance): Peterhead (15.3 miles), Ellon (22.4 miles).
What to think about for safety inspections and risk assessments in Fraserburgh
- Older shopfronts and listed buildings in Fraserburgh may have narrow side screens and tight gaps that were thought acceptable when fitted. The report weighs what can reasonably be improved.
- Doors on escape routes must let people out safely during a fire or evacuation. The inspection checks break-out, power-failure opening or manual release, as the fire strategy requires.
- Care homes and hospitals in Fraserburgh have users who move slowly or unpredictably. The inspection pays close attention to sensor coverage and door speeds where frail or confused people pass through.
- Public buildings in Fraserburgh, such as libraries and leisure centres, often have several doors of different ages. A whole-site inspection puts every door into one ranked report.
- Programme switches left in the wrong mode cause many incidents. The inspection checks the switch is secure, labelled and set correctly for each time of day.
Safety inspections and risk assessments in Fraserburgh: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £125 to £250 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Safety inspection and risk assessment, existing door | £125 – £250 | per door, written report, ex VAT |
| Inspection added to a service visit | reduced | quoted with the service |
| Upgrades found by the inspection | quoted separately | see safety and compliance upgrades |
The inspection price is agreed in writing before the visit. Any upgrades the report recommends are quoted separately so you can plan them.
Standards and rules in Scotland
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.
How it works
- Make contact. Phone, email or use the form. Tell us the type of door, what it is doing and whether it is safe to use, so the right visit for safety inspections and risk assessments can be planned.
- Written visit price. The cost of attending is agreed in writing before the visit is booked. For a planned service or inspection, the price per door and what each visit includes are set out at the same time.
- On-site work. The engineer, working under our management, checks the door from end to end, deals with the fault or the service, and tests every safety function and sensor setting before signing the door off.
- Report and quote. You receive a report of the findings. Where a repair, part or upgrade is recommended, it is quoted in writing so you can decide, and the door is left in a safe state if it cannot be used.
Combine servicing and a safety inspection in Fraserburgh in one visit. Contact us with your door details for a written price covering both.
Safety inspections and risk assessments in Fraserburgh: questions
Our insurer in Fraserburgh has asked for a risk assessment. Is this what they mean?
Most likely. Insurers usually want a documented, site-specific risk assessment of the door by a competent person, along with service records. Check their exact wording and send it to us. Our report covers the door's hazard zones, test results and recommended actions, which is what most insurers expect to see.
What do you charge for safety inspections and risk assessments in Fraserburgh?
Our guide is £125 to £250 excluding VAT (per door), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Fraserburgh, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
How long will our door in Fraserburgh be out of use during the inspection?
Usually only for short periods while sensors are tested and the door is observed in different modes. A single door generally takes about an hour in total. For busy entrances the inspection can be planned for a quieter time, or one leaf tested at a time where the door allows it.
Do you carry out automatic door safety inspections in Fraserburgh?
Yes. We organise the inspection and issue the report, and the assessment in Fraserburgh is carried out by a specialist engineer under our management. Each door is assessed on site against BS EN 16005 hazard zones, its safety sensors are tested and you receive a written report with ranked findings. The inspection price is agreed in writing before the visit.
How soon can an engineer get to Fraserburgh?
We do not promise response times. When you book, we give you the earliest date we can offer and confirm it once the price is agreed. If the door is unsafe in the meantime, it is usually best to switch it off or set it to a safe mode, put up a sign and keep people clear of it.
Which makes of automatic door can you work on in Fraserburgh?
Engineers working under our management work on most makes of automatic door, including sliding, swing, folding, telescopic and revolving types. Some older or obsolete operators have limited parts availability. If that applies, we explain the options, which may include a replacement drive unit on the existing frame, and quote them before anything is ordered.
Is a building warrant needed for a new automatic entrance in Fraserburgh?
Often, yes. Most building work in Scotland needs a building warrant before it starts, and the non-domestic Technical Handbook sets out what an accessible entrance should provide, including a clear opening of at least 800 mm. We tell you at the survey if your job is likely to need one.