Covering Cannock and nearby
Homes, businesses and public buildings throughout the WS11 and WS12 postcode districts can arrange revolving doors with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Cannock for the job rather than working from premises in town.
Care homes and supported living schemes are spread across Cannock and the surrounding area, and their doors have to balance easy access with resident safety. Slow, gentle operation, hold-open devices linked to the fire alarm and controlled exits are typical requirements.
Nearby towns we also list for revolving doors (straight-line distance): Burntwood (4.4 miles), Bloxwich (5.1 miles), Rugeley (6.2 miles), Wednesfield (6.9 miles), Willenhall (7.4 miles), Walsall (7.5 miles).
What to think about for revolving doors in Cannock
- A revolving door needs a flat, level floor and often a recess for the bottom bearing and mat. Check whether the existing slab can be cut, or whether the floor needs building up.
- Revolving doors with curved glass drum walls have longer lead times. Allow for them in any refurbishment programme across Staffordshire, and confirm dates before booking floor layers or shopfitters.
- Busy reception areas in Cannock may want to keep people moving during installation week. A second entrance, temporary signs and staged work all help visitors find their way in.
- The fire strategy decides how people will escape. Agree with your fire risk assessor where the pass door and other exits will be before the revolving door is designed.
- Listed buildings and conservation areas in Cannock may need consent for a revolving door, especially if it projects or changes the façade. Drawings and finish samples help the planning authority.
Revolving doors in Cannock: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £29,995 to £59,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Manual revolving door | from £14,995 | installed, ex VAT; priced on survey |
| Automatic revolving door, three or four wings, about 2.1 m diameter | £29,995 – £59,995 | installed, ex VAT |
| Large-diameter or high-capacity revolving doors | Priced on survey | often with a side swing or sliding door alongside |
| Side door for wheelchair users, prams and escape | see sliding and swing doors | usually needed alongside a revolving door |
Standards and rules in England
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for revolving doors and book a survey in Cannock.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Book a free survey in Cannock to compare manual and automatic revolving doors, with drawings and one fixed, itemised quote.
Revolving doors in Cannock: questions
How long does a revolving door project in Cannock take?
Revolving doors are typically 8 to 14 weeks from order, once drawings are approved. On site, an automatic revolving door usually takes several days, covering floor preparation, drum and canopy, wings, drive and commissioning. We agree the programme with you and plan how visitors will get in while the work is done.
What do you charge for revolving doors in Cannock?
Our guide is £29,995 to £59,995 excluding VAT (per automatic door), the same guide prices we use across the UK. The free site survey in Cannock confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Will a revolving door in Cannock work with our fire alarm?
It can. An automatic revolving door can be linked to the fire alarm so it stops, slows or folds as the fire strategy requires, and the pass door can be set to open. Your alarm engineer usually makes the panel connection, and the quote shows who is responsible for each part.
Should we choose manual or automatic for our building in Cannock?
Manual doors suit smaller entrances with steady traffic and are simpler to maintain. Automatic doors suit busier entrances and visitors with luggage, and add sensors, stop buttons and a slow-speed mode. We explain the difference at the survey and recommend the type that fits how your entrance is used.
How do you make sure the door works for disabled visitors in Cannock?
We look at who uses the entrance: wheelchair users, people with walking aids, parents with buggies and older visitors. That shapes the opening width, the opening speed, the hold-open time and where push pads or sensors go. Service providers and employers have duties to make reasonable adjustments under equality and accessibility law, and an automatic door is a common one.
Will the building stay secure while the entrance is being changed?
We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Cannock is agreed before work starts.
Do businesses in Cannock have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.