Covering Cannock and nearby
From shops and surgeries to schools, care homes and private houses, any building in the WS11 and WS12 postcode districts can be covered for automatic sliding doors. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Care homes and supported living schemes are spread across Cannock and the surrounding area, and their doors have to balance easy access with resident safety. Slow, gentle operation, hold-open devices linked to the fire alarm and controlled exits are typical requirements.
Nearby towns we also list for automatic sliding doors (straight-line distance): Burntwood (4.4 miles), Bloxwich (5.1 miles), Rugeley (6.2 miles), Wednesfield (6.9 miles), Willenhall (7.4 miles), Walsall (7.5 miles).
What to think about for automatic sliding doors in Cannock
- Wind blowing straight at an entrance can make sliding leaves drag or cause the door to open when nobody is there. On exposed frontages across Staffordshire, a partial opening mode or a draught lobby is worth considering.
- Surgeries and clinics need wide, easy access for wheelchairs, walking frames and the occasional stretcher. A clear opening of at least 1,000 mm is, in our view, a sensible starting point, and wider still where trolleys or beds pass through.
- Shops that use a roller shutter at night need the new header to sit below the shutter box and clear of its guide channels. Both are measured at survey so the door and shutter can work together.
- A sloping pavement or uneven threshold in front of a door in Cannock can stop floor guides working properly. The survey records floor levels, so any levelling is included in the quote rather than discovered on the day.
- Business park offices around Cannock often have a reception door that is busy for an hour each morning and quiet for the rest of the day. A timer on the programme switch can lock it out of hours without anyone remembering to.
Automatic sliding doors in Cannock: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £4,495 to £12,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Single-slide door set, about 1.0 to 1.2 m clear opening | £4,495 – £7,995 | framed aluminium and glass, installed, ex VAT |
| Bi-parting door set, about 2 m clear opening, with side screens | £6,995 – £12,995 | installed, ex VAT |
| Large, full-height or heavy-duty entrances | from £14,995 | Priced on survey |
| Break-out leaves and screens for an escape route | £995 – £3,995 | added to a sliding door, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Cannock and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on automatic sliding doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Book a survey in Cannock and an engineer will measure the opening, check the power and floor, and talk you through the sliding layouts that fit.
Automatic sliding doors in Cannock: questions
Can you fit a sliding door in Cannock outside our opening hours?
Usually, yes. Many shops and surgeries prefer an early start, an evening or a weekend so the entrance stays open during trading. Out-of-hours work is shown as a separate line in the quote, so you can compare it with a weekday installation and choose whichever suits the business better.
What price range should I expect for automatic sliding doors in Cannock?
Our guide is £4,495 to £12,995 excluding VAT (per door set), the same guide prices we use across the UK. The free site survey in Cannock confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can the old door in Cannock be removed and taken away?
Yes. Removal of the existing door and frame is listed as a line in the quote, along with making good around the opening. Glass and aluminium are taken away for recycling where possible. If the old door belongs to a landlord, tell us at survey so its removal can be agreed with them before the work is booked.
Who checks that a new sliding door in Cannock is safe?
The installing engineer sets the speeds, forces and sensor zones, tests the door and completes a site-specific risk assessment before handing it over. You keep the test record and the risk assessment for your own files, and they form the baseline for every service visit and inspection after that.
What happens once the installation in Cannock is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Will the building stay secure while the entrance is being changed?
We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Cannock is agreed before work starts.
Who is responsible for automatic doors on escape routes in Cannock?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.