Covering Herne Bay and nearby
Engineers working under our management travel to addresses across the CT6 postcode district for revolving doors. There is no depot or showroom in Herne Bay; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
GP surgeries, dental practices and pharmacies in Herne Bay often serve older patients and people with limited mobility. A low-energy swing operator, or a gentle sliding door with a push pad, can make a real difference at entrances like these.
Nearby towns we also list for revolving doors (straight-line distance): Whitstable (4.5 miles), Canterbury (6.8 miles), Faversham (11.1 miles), Margate (11.1 miles), Ramsgate (12.8 miles), Broadstairs (13.6 miles).
What to think about for revolving doors in Herne Bay
- Plan the pass door first. Wheelchair users, pushchairs and deliveries need an accessible powered door beside the drum, and it should be easy to find from the street in Herne Bay, with clear signs.
- Planned servicing is essential on revolving doors because wing edges, stop buttons and sensors protect people on every turn. Budget for regular visits from the start, with each visit priced in writing.
- Tall buildings in Herne Bay can pull a strong draught through an open entrance. A revolving door controls this better than sliding doors, which is one reason office towers use them.
- A revolving door needs a flat, level floor and often a recess for the bottom bearing and mat. Check whether the existing slab can be cut, or whether the floor needs building up.
- Revolving doors with curved glass drum walls have longer lead times. Allow for them in any refurbishment programme across Kent, and confirm dates before booking floor layers or shopfitters.
Revolving doors in Herne Bay: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £29,995 to £59,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Manual revolving door | from £14,995 | installed, ex VAT; priced on survey |
| Automatic revolving door, three or four wings, about 2.1 m diameter | £29,995 – £59,995 | installed, ex VAT |
| Large-diameter or high-capacity revolving doors | Priced on survey | often with a side swing or sliding door alongside |
| Side door for wheelchair users, prams and escape | see sliding and swing doors | usually needed alongside a revolving door |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Building regulations guidance treats revolving doors as not accessible on their own, so an accessible powered swing or sliding door should be provided alongside. In England, fire safety law says sliding or revolving doors must not be used for exits specifically intended as emergency exits.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for revolving doors and book a survey in Herne Bay.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Planning a new reception in Herne Bay? Contact us early, so the revolving door, pass door and canopy fit your programme.
Revolving doors in Herne Bay: questions
Is the survey for a revolving door in Herne Bay free?
Yes. For a new revolving door and pass door, the survey costs nothing and carries no obligation. We look at the space, structure, floor, traffic and fire strategy, then send drawings and a fixed, itemised written quote. Each item is listed separately, which makes it easy to compare with other quotes.
How much should I budget for revolving doors in Herne Bay?
Our guide is £29,995 to £59,995 excluding VAT (per automatic door), the same guide prices we use across the UK. The free site survey in Herne Bay confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you install revolving doors in Herne Bay?
Yes. We arrange manual and automatic revolving doors, with their accessible pass doors, for buildings in Herne Bay and across Kent. Specialist automatic door engineers working under our management carry out the survey, installation and commissioning, and we are the contracting party throughout.
Will a revolving door in Herne Bay work with our fire alarm?
It can. An automatic revolving door can be linked to the fire alarm so it stops, slows or folds as the fire strategy requires, and the pass door can be set to open. Your alarm engineer usually makes the panel connection, and the quote shows who is responsible for each part.
Can automatic doors be fitted to a listed building in Herne Bay?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
What should I send before the survey in Herne Bay?
A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for revolving doors together more easily.
Which building regulations apply to a new automatic entrance in Herne Bay?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.