Covering Herne Bay and nearby
For frameless glass automatic doors, coverage around Herne Bay is set by postcode and includes the CT6 postcode district, as well as nearby addresses in Kent. Specialist engineers working under our management attend each site, and the price is agreed in writing beforehand.
GP surgeries, dental practices and pharmacies in Herne Bay often serve older patients and people with limited mobility. A low-energy swing operator, or a gentle sliding door with a push pad, can make a real difference at entrances like these.
Nearby towns we also list for frameless glass automatic doors (straight-line distance): Whitstable (4.5 miles), Canterbury (6.8 miles), Faversham (11.1 miles), Margate (11.1 miles), Ramsgate (12.8 miles), Broadstairs (13.6 miles).
What to think about for frameless glass automatic doors in Herne Bay
- Hotels and restaurants in Herne Bay often want the door to stay open on warm days and close in bad weather. A programme switch with hold-open and automatic modes makes that a simple daily choice.
- Street-facing doors in Herne Bay that take the full force of wind and rain may be better as framed sliding doors. Frameless leaves have small gaps that let draughts and noise through.
- Every edge and fitting on a frameless door is visible. Choose a top rail and clamp finish, such as satin stainless or black, that suits the rest of the ironmongery in the building.
- Clear glass is easy to walk into. Plan manifestation at the outset, whether frosted bands or a pattern based on your logo, rather than adding stickers after the door is fitted.
- Listed interiors and heritage buildings in Herne Bay sometimes favour frameless glass because it hides less of the original fabric. Consent may still be needed, so check with the planning authority early.
Frameless glass automatic doors in Herne Bay: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £5,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Single-slide frameless glass door | £5,495 – £8,995 | installed, ex VAT |
| Bi-parting frameless glass door, about 2 m clear opening | £7,495 – £12,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Standards and rules in England
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Herne Bay.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
For an all-glass entrance in Herne Bay that is measured, fitted and set up properly, contact us and book your free site survey.
Frameless glass automatic doors in Herne Bay: questions
Can a frameless door in Herne Bay match our existing glass partitions?
Usually, yes. We can match glass type and thickness, gap sizes and fitting finishes to the partition, working from the fit-out drawings where you have them. The survey checks the partition head and tolerances, so the new door sits in line with the existing glass and the operator is fixed to something solid above.
How much should I budget for frameless glass automatic doors in Herne Bay?
Our guide starts from £5,495 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Herne Bay confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can a frameless door in Herne Bay be connected to our access control?
Yes. The operator can be linked to card readers, fob readers, keypads, intercoms or a timer, so the door opens freely in working hours and only for authorised people at other times. Tell us what you already have at the survey and the quote will set out the interface work.
Is the survey for a frameless door in Herne Bay free?
Yes. For a new frameless automatic door, the survey is free and you are under no obligation. The engineer measures the opening, checks the structure above and the floor below, discusses glass and fittings, and you then receive a drawing and a fixed, itemised written quote.
Can automatic doors be fitted to a listed building in Herne Bay?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
What should I send before the survey in Herne Bay?
A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for frameless glass automatic doors together more easily.
Do businesses in Herne Bay have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.