Coverage across Greater Manchester
Enquiries about revolving doors come to us from right across Greater Manchester, and each one is handled the same way. Specialist automatic door engineers working under our management travel to the address, and we remain your contracting party throughout. The 44 towns we list below are a starting point, not a boundary: villages, business parks and rural sites in between are covered as well.
Towns listed in Greater Manchester: Manchester, Oldham, Wigan, Bolton, Stockport, Salford, Rochdale, Sale, Bury, Altrincham, Middleton, Ashton-under-Lyne, Leigh, Stretford, Urmston, Chadderton, Eccles, Tyldesley, Hyde, Walkden, Prestwich, Radcliffe, Cheadle Hulme, Heywood, Denton, Stalybridge, Ashton-in-Makerfield, Westhoughton, Farnworth, Hindley, Golborne, Droylsden, Whitefield, Swinton, Royton, Atherton, Dukinfield, Failsworth, Hazel Grove, Irlam, Horwich, Bramhall, Ramsbottom, Bredbury.
What to think about for revolving doors in Greater Manchester
- Hotel entrances in Greater Manchester see guests with large cases and families with pushchairs. A larger three-wing automatic door and a clearly signed pass door keep the flow moving.
- Revolving doors with curved glass drum walls have longer lead times. Allow for them in any refurbishment programme across Greater Manchester, and confirm dates before booking floor layers or shopfitters.
- Some visitors to buildings in Greater Manchester find revolving doors hard to use. A slow-speed button, clear signs and staff who can direct people to the pass door all help.
- Listed buildings and conservation areas in Greater Manchester may need consent for a revolving door, especially if it projects or changes the façade. Drawings and finish samples help the planning authority.
- A revolving door needs a flat, level floor and often a recess for the bottom bearing and mat. Check whether the existing slab can be cut, or whether the floor needs building up.
Revolving doors in Greater Manchester: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £29,995 to £59,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Manual revolving door | from £14,995 | installed, ex VAT; priced on survey |
| Automatic revolving door, three or four wings, about 2.1 m diameter | £29,995 – £59,995 | installed, ex VAT |
| Large-diameter or high-capacity revolving doors | Priced on survey | often with a side swing or sliding door alongside |
| Side door for wheelchair users, prams and escape | see sliding and swing doors | usually needed alongside a revolving door |
Standards and rules in England
Building regulations guidance treats revolving doors as not accessible on their own, so an accessible powered swing or sliding door should be provided alongside. In England, fire safety law says sliding or revolving doors must not be used for exits specifically intended as emergency exits.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for revolving doors and book a survey in Greater Manchester.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Send photos and any drawings of the entrance in Greater Manchester, and we will come back with options for a revolving door and an accessible pass door.
Revolving doors in Greater Manchester: questions
How long does a revolving door project in Greater Manchester take?
Revolving doors are typically 8 to 14 weeks from order, once drawings are approved. On site, an automatic revolving door usually takes several days, covering floor preparation, drum and canopy, wings, drive and commissioning. We agree the programme with you and plan how visitors will get in while the work is done.
What is the guide price for revolving doors in Greater Manchester?
Our guide is £29,995 to £59,995 excluding VAT (per automatic door), the same guide prices we use across the UK. The free site survey in Greater Manchester confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do we need a pass door beside a revolving door in Greater Manchester?
In practice, yes. A revolving door is not accessible on its own, so an accessible powered swing or sliding door should be provided alongside for wheelchair users, pushchairs, deliveries and anyone who needs it. It also usually forms part of the escape strategy. We design and quote both together.
Can our reception in Greater Manchester stay open during installation?
Usually, if there is a second entrance or the pass door can be fitted first. We stage the work so the building stays secure overnight and visitors are directed clearly. Where the revolving door is the only way in, we discuss weekend or out-of-hours working, with any extra cost shown in the quote.
What happens once the installation in Greater Manchester is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Do I need permission from a landlord or the council before work in Greater Manchester?
It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.
Which building regulations apply to a new automatic entrance in Greater Manchester?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.