Coverage across Dorset
From large town centres to quiet villages, entrances across Dorset vary a great deal, and the right approach to revolving doors varies with them. A surgery door used by patients with walking frames needs different settings from a supermarket entrance, so the engineer looks at the actual door first. The towns we list in this area currently number 5.
Towns listed in Dorset: Bournemouth, Poole, Weymouth, Christchurch, Ferndown.
What to think about for revolving doors in Dorset
- Plan the pass door first. Wheelchair users, pushchairs and deliveries need an accessible powered door beside the drum, and it should be easy to find from the street in Dorset, with clear signs.
- Some visitors to buildings in Dorset find revolving doors hard to use. A slow-speed button, clear signs and staff who can direct people to the pass door all help.
- Busy reception areas in Dorset may want to keep people moving during installation week. A second entrance, temporary signs and staged work all help visitors find their way in.
- A revolving door needs a flat, level floor and often a recess for the bottom bearing and mat. Check whether the existing slab can be cut, or whether the floor needs building up.
- Revolving doors with curved glass drum walls have longer lead times. Allow for them in any refurbishment programme across Dorset, and confirm dates before booking floor layers or shopfitters.
Revolving doors in Dorset: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £29,995 to £59,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Manual revolving door | from £14,995 | installed, ex VAT; priced on survey |
| Automatic revolving door, three or four wings, about 2.1 m diameter | £29,995 – £59,995 | installed, ex VAT |
| Large-diameter or high-capacity revolving doors | Priced on survey | often with a side swing or sliding door alongside |
| Side door for wheelchair users, prams and escape | see sliding and swing doors | usually needed alongside a revolving door |
Standards and rules in England
Building regulations guidance treats revolving doors as not accessible on their own, so an accessible powered swing or sliding door should be provided alongside. In England, fire safety law says sliding or revolving doors must not be used for exits specifically intended as emergency exits.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Dorset and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on revolving doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Book a free survey in Dorset to compare manual and automatic revolving doors, with drawings and one fixed, itemised quote.
Revolving doors in Dorset: questions
How long does a revolving door project in Dorset take?
Revolving doors are typically 8 to 14 weeks from order, once drawings are approved. On site, an automatic revolving door usually takes several days, covering floor preparation, drum and canopy, wings, drive and commissioning. We agree the programme with you and plan how visitors will get in while the work is done.
What do you charge for revolving doors in Dorset?
Our guide is £29,995 to £59,995 excluding VAT (per automatic door), the same guide prices we use across the UK. The free site survey in Dorset confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Who services a revolving door in Dorset after installation?
We can, with each visit priced in writing before an engineer attends. Revolving doors should have their safety sensors, stop buttons and wing edges checked by a trained engineer at least once a year, and busy entrances usually need more frequent visits. Staff should also make simple daily checks and keep a record.
Should we choose manual or automatic for our building in Dorset?
Manual doors suit smaller entrances with steady traffic and are simpler to maintain. Automatic doors suit busier entrances and visitors with luggage, and add sensors, stop buttons and a slow-speed mode. We explain the difference at the survey and recommend the type that fits how your entrance is used.
Can automatic doors be fitted to a listed building in Dorset?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
What should I send before the survey in Dorset?
A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for revolving doors together more easily.
Which building regulations apply to a new automatic entrance in Dorset?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.