Covering Epsom and nearby
We do not keep premises in Epsom. Instead, enquiries about drive unit replacement come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the KT18 and KT19 postcode districts on a date that suits the site.
Libraries, health centres and council buildings in Epsom still need accessible entrances, whatever their size. A single automatic door with a push pad or touch-free switch is often enough to give everyone easy access.
Nearby towns we also list for drive unit replacement (straight-line distance): Ewell (1.6 miles), Sutton (3.3 miles), Leatherhead (3.6 miles), Surbiton (4.4 miles), Carshalton (5.1 miles), Morden (5.6 miles).
What to think about for drive unit replacement in Epsom
- Listed buildings and conservation areas in Epsom make it attractive to keep the existing frame. A new operator inside the existing header changes little that can be seen.
- Hospitals and care homes in Epsom may need an alternative entrance during the changeover. Plan signs and step-free access for wheelchair users before work starts.
- Doors linked to the fire alarm or access control in Epsom need those links rewired to the new controller. Let us know which systems connect to the door.
- Ask for the paperwork. A converted door should come with its risk assessment, Declaration of Conformity and user instructions, which belong with your building and maintenance records.
- Battery backup is easier to add with a new drive unit. It lets the door open or close safely in a power cut, which matters most on escape routes.
Drive unit replacement in Epsom: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £1,995 to £3,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| New drive unit on an existing automatic sliding door | £1,995 – £3,995 | existing leaves kept, installed, ex VAT |
| New operator on an existing automatic swing door | £1,795 – £3,995 | installed, ex VAT |
| Sensors replaced at the same time | £195 – £495 | per sensor, ex VAT |
Standards and rules in England
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Epsom.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Send the make and model from the operator cover of your door in Epsom, and we will arrange a survey at no cost for a replacement drive unit.
Drive unit replacement in Epsom: questions
Do you provide paperwork for the converted door in Epsom?
Yes. When we fit a new drive unit we prepare the paperwork for the finished door, including the risk assessment, Declaration of Conformity and user instructions, and hand it over with the test results and settings. It belongs with your building records.
What do you charge for drive unit replacement in Epsom?
Our guide is £1,995 to £3,995 excluding VAT (per door), the same guide prices we use across the UK. The free site survey in Epsom confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
What if the frame of our door in Epsom is not worth keeping?
Then we will tell you. Damaged or corroded frames, glass that is not safety glass, or an opening that is too narrow for the people using it are all reasons to choose a new door instead. We can quote both options so you can compare them side by side.
Can you fit a new operator to a door another company installed in Epsom?
Yes. We replace drive units on doors whoever fitted them. The survey identifies the existing header, leaves and track, and adapter plates usually let a new drive unit from one of the major European operator brands fit without changing the frame.
How are payments structured for work in Epsom?
Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.
What happens to the old door when a new one is fitted in Epsom?
If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.
Which building regulations apply to a new automatic entrance in Epsom?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.