UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Drive unit replacement · Greater Manchester

Drive unit replacement in Salford

A new drive unit fitted to an existing door in Salford comes with new sensors where needed, a set-up tested with reference to BS EN 16005 and the conformity paperwork for the finished door, all priced on a fixed quote.

Town
Salford
Area
Greater Manchester
Postcodes
M5, M6, M7, M50
Guide price
Typically £1,995 to £3,995 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Salford and nearby

We do not keep premises in Salford. Instead, enquiries about drive unit replacement come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the M5, M6, M7 and M50 postcode districts on a date that suits the site.

Town-centre buildings in Salford range from modern units to older shopfronts. Older frontages can have uneven floors, limited head height and timber frames that need checking before an operator is fitted or adjusted, and the engineer looks at these on site.

Nearby towns we also list for drive unit replacement (straight-line distance): Eccles (1.8 miles), Manchester (2.2 miles), Swinton (2.6 miles), Stretford (2.8 miles), Prestwich (3.2 miles), Urmston (3.8 miles).

What to think about for drive unit replacement in Salford

  • Busy retail entrances in Salford may prefer the changeover after closing time or on a quiet trading day. Tell us your hours when you book the survey.
  • Listed buildings and conservation areas in Salford make it attractive to keep the existing frame. A new operator inside the existing header changes little that can be seen.
  • Battery backup is easier to add with a new drive unit. It lets the door open or close safely in a power cut, which matters most on escape routes.
  • Check the power supply. A dedicated fused spur and isolator near the door is usually needed, and older installations sometimes need electrical work before the new operator goes in.
  • Heavy glass leaves need an operator rated for their weight. The survey records the size and glass type of each leaf so the right drive unit is specified.

Drive unit replacement in Salford: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £1,995 to £3,995 ex VAT.

ItemGuide priceNotes
New drive unit on an existing automatic sliding door£1,995 – £3,995existing leaves kept, installed, ex VAT
New operator on an existing automatic swing door£1,795 – £3,995installed, ex VAT
Sensors replaced at the same time£195 – £495per sensor, ex VAT

Standards and rules in England

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.

How it works

  1. Send photos and the address. A few pictures of the door from both sides, the address in Salford and a note of who uses the entrance help us understand the job before anyone visits the site.
  2. No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
  3. Itemised quote to approve. We price every element of the work on drive unit replacement separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
  4. Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.

Get in touch about drive unit replacement in Salford. The door is surveyed free of charge and the changeover planned around your opening hours.

Drive unit replacement in Salford: questions

Can the replacement in Salford include a service plan?

It can. After the changeover we recommend a service interval based on how heavily the door is used, and a service contract can be set up with a written record of each visit. Servicing is priced separately and agreed in writing before any visit takes place.

What will drive unit replacement in Salford cost?

Our guide is £1,995 to £3,995 excluding VAT (per door), the same guide prices we use across the UK. The free site survey in Salford confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

What if the frame of our door in Salford is not worth keeping?

Then we will tell you. Damaged or corroded frames, glass that is not safety glass, or an opening that is too narrow for the people using it are all reasons to choose a new door instead. We can quote both options so you can compare them side by side.

What lead time should we expect in Salford?

Once the quote is accepted, drive units are typically 2 to 4 weeks to arrive, depending on the length and weight rating needed. The changeover date is agreed with you as soon as the parts are confirmed, and it can be planned around your opening hours.

Is there a warranty on drive unit replacement?

Yes. The warranty terms for the equipment and the installation are set out in your written quote, so you can see exactly what is covered before you accept. Keeping the door serviced at the recommended intervals helps keep it in good order, and the quote explains any conditions that apply to the warranty.

Will the building stay secure while the entrance is being changed?

We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Salford is agreed before work starts.

Do businesses in Salford have to fit automatic doors?

No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.

Next step

Drive unit replacement in Salford

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.