Covering Romsey and nearby
We do not keep premises in Romsey. Instead, enquiries about frameless glass automatic doors come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the SO51 postcode district on a date that suits the site.
Many buildings in Romsey are older, with timber frames, thick walls, steps or uneven thresholds. These affect where an operator and sensors can go, and the engineer checks them on site before anything is fitted or adjusted.
Nearby towns we also list for frameless glass automatic doors (straight-line distance): Chandler's Ford (4.4 miles), Totton (4.9 miles), Eastleigh (6.7 miles), Southampton (7.2 miles), Winchester (9.5 miles), Hythe (9.9 miles).
What to think about for frameless glass automatic doors in Romsey
- Laminated glass is worth considering for ground-floor doors. It stays in place if broken, which keeps the building secure until a replacement leaf can be made.
- Cleaning staff at busy venues in Romsey should use non-abrasive products on frameless doors, keep the floor guide clear of grit and report any chipped glass edge straight away.
- Hotels and restaurants in Romsey often want the door to stay open on warm days and close in bad weather. A programme switch with hold-open and automatic modes makes that a simple daily choice.
- Every edge and fitting on a frameless door is visible. Choose a top rail and clamp finish, such as satin stainless or black, that suits the rest of the ironmongery in the building.
- Clear glass is easy to walk into. Plan manifestation at the outset, whether frosted bands or a pattern based on your logo, rather than adding stickers after the door is fitted.
Frameless glass automatic doors in Romsey: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £5,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Single-slide frameless glass door | £5,495 – £8,995 | installed, ex VAT |
| Bi-parting frameless glass door, about 2 m clear opening | £7,495 – £12,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Standards and rules in England
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Describe what you need. Whether the job is frameless glass automatic doors for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Romsey.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
For an all-glass entrance in Romsey that is measured, fitted and set up properly, contact us and book your free site survey.
Frameless glass automatic doors in Romsey: questions
Can a frameless door in Romsey be connected to our access control?
Yes. The operator can be linked to card readers, fob readers, keypads, intercoms or a timer, so the door opens freely in working hours and only for authorised people at other times. Tell us what you already have at the survey and the quote will set out the interface work.
What will frameless glass automatic doors in Romsey cost?
Our guide starts from £5,495 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Romsey confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do we need building approval for a frameless door in Romsey?
Replacing a door like for like does not always need approval, but new entrances and wider building work can. Building regulations guidance on access to buildings applies to new buildings and to building work on existing ones, and the details differ in each UK nation. Your local building control or building standards service can confirm what applies.
Will a frameless door suit our street entrance in Romsey?
It depends on exposure. Sheltered entrances, recessed doorways and doors behind a canopy usually suit frameless glass well. A door facing straight onto a windy street may suffer from draughts and noise. We will give you an honest view at the survey and, where needed, suggest a framed door or a frameless inner door in a lobby.
How do you make sure the door works for disabled visitors in Romsey?
We look at who uses the entrance: wheelchair users, people with walking aids, parents with buggies and older visitors. That shapes the opening width, the opening speed, the hold-open time and where push pads or sensors go. Service providers and employers have duties to make reasonable adjustments under equality and accessibility law, and an automatic door is a common one.
What power supply is needed for frameless glass automatic doors in Romsey?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Who is responsible for automatic doors on escape routes in Romsey?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.