UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Fire door hold-open devices · West Sussex

Fire door hold-open devices in Chichester

If residents or staff in Chichester struggle with heavy self-closing doors, a free-swing closer or an alarm-linked magnet can make them easy to use without weakening fire protection. Book a free survey and we will list the right device for every door.

Town
Chichester
Area
West Sussex
Postcodes
PO19
Guide price
From £145 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Chichester and nearby

Engineers working under our management travel to addresses across the PO19 postcode district for fire door hold-open devices. There is no depot or showroom in Chichester; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.

Independent businesses in Chichester often have one entrance and cannot close for long. Work is usually scheduled early, late or on a quiet day, and where a door must be out of use for a period, we plan to keep the entrance usable or secure.

Nearby towns we also list for fire door hold-open devices (straight-line distance): Bognor Regis (5.8 miles), Emsworth (6.9 miles), Havant (9.1 miles), Littlehampton (10.6 miles), Waterlooville (11.3 miles), Portsmouth (13.8 miles).

What to think about for fire door hold-open devices in Chichester

  • If the alarm panel has no spare outputs, a relay or an extra interface may be needed. Your alarm engineer can confirm this, and it is added to the quote once agreed.
  • Doors that open too far from a wall for a wall magnet can use a floor-mounted unit or a magnet on an extension arm. The survey measures where each door rests when open.
  • Think about who tests the fire alarm each week at your building in Chichester. Adding a walk past the held-open doors to that test is the easiest way to confirm they release.
  • Fire doors on stairs and protected escape routes need particular care. The fire risk assessment may allow some of them to be held open and not others, so pricing is door by door.
  • Hard-wired magnets need a power supply near each door. In buildings in Chichester where that is awkward, battery units avoid running new cables along finished corridors.

Fire door hold-open devices in Chichester: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.

ItemGuide priceNotes
Battery acoustic hold-open unit£145 – £295per door, fitted, ex VAT
Hard-wired hold-open magnet linked to the fire alarm£245 – £595per door, ex VAT; alarm panel work extra
Free-swing door closer linked to the fire alarm£395 – £895per door, fitted, ex VAT

Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.

Standards and rules in England

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

Fire doors that are held open must close automatically when the fire alarm operates. Where hold-open devices can be used is decided by the fire risk assessment, which is the job of the responsible person under the Regulatory Reform (Fire Safety) Order 2005.

How it works

  1. Send photos and the address. A few pictures of the door from both sides, the address in Chichester and a note of who uses the entrance help us understand the job before anyone visits the site.
  2. No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
  3. Itemised quote to approve. We price every element of the work on fire door hold-open devices separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
  4. Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.

Send us a list of the doors you want held open at your building in Chichester, plus any notes from your fire risk assessment, and we will arrange a survey at no cost.

Fire door hold-open devices in Chichester: questions

Do you fit fire door hold-open devices in Chichester?

Yes. We arrange surveys and installations in Chichester through specialist engineers working under our management. They look at each door, its closer and the alarm system, recommend a device for each door and we send a fixed, itemised quote. The survey costs you nothing, and you are under no obligation to accept the quote.

Can you give me a price for fire door hold-open devices in Chichester?

Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Chichester confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Do care homes in Chichester use free-swing closers?

Many do. A free-swing closer lets residents open their bedroom door without pushing against a closer, and it still shuts the door when the fire alarm operates. Whether it suits each room depends on the home's fire risk assessment and evacuation strategy, which we read before recommending any device.

How soon can hold-open devices be fitted in Chichester?

Once the quote is accepted, supply is typically 1 to 3 weeks, and fitting a few devices on one floor usually takes a day. Larger jobs are planned in stages so doors are never left without protection. Your quote shows the expected programme, and fitting dates are agreed with you before work starts.

What do you need from us for parking and access in Chichester?

Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.

What power supply is needed for fire door hold-open devices in Chichester?

Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.

Do businesses in Chichester have to fit automatic doors?

No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.

Next step

Fire door hold-open devices in Chichester

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.