UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Fire door hold-open devices · Somerset

Fire door hold-open devices in Nailsea

Hold-open devices let fire doors stay open in normal use and close as soon as the alarm sounds. For buildings in Nailsea we supply and fit wired magnets, free-swing closers and radio or acoustic units, working with your alarm engineer where a panel connection is needed.

Town
Nailsea
Area
Somerset
Postcodes
BS48
Guide price
From £145 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Nailsea and nearby

For fire door hold-open devices, coverage around Nailsea is set by postcode and includes the BS48 postcode district, as well as nearby addresses in Somerset. Specialist engineers working under our management attend each site, and the price is agreed in writing beforehand.

GP surgeries, dental practices and pharmacies in Nailsea often serve older patients and people with limited mobility. A low-energy swing operator, or a gentle sliding door with a push pad, can make a real difference at entrances like these.

Nearby towns we also list for fire door hold-open devices (straight-line distance): Portishead (3.5 miles), Clevedon (4.3 miles), Clifton (6.3 miles), Bedminster (6.7 miles), Bristol (7.1 miles), Caldicot (10.7 miles).

What to think about for fire door hold-open devices in Nailsea

  • Schools and colleges in Nailsea may want hold-open devices fitted during the holidays so corridors are not disrupted in term time. Fitting can be planned around term dates.
  • Busy office corridors suit wall magnets that hold doors right back against the wall, out of the way of people and trolleys, until the alarm releases them.
  • Think about who tests the fire alarm each week at your building in Nailsea. Adding a walk past the held-open doors to that test is the easiest way to confirm they release.
  • Listed buildings and conservation areas can make new cable runs difficult. Radio-triggered battery units avoid most wiring, although the transmitter still needs a connection at the alarm panel.
  • If the alarm panel has no spare outputs, a relay or an extra interface may be needed. Your alarm engineer can confirm this, and it is added to the quote once agreed.

Fire door hold-open devices in Nailsea: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.

ItemGuide priceNotes
Battery acoustic hold-open unit£145 – £295per door, fitted, ex VAT
Hard-wired hold-open magnet linked to the fire alarm£245 – £595per door, ex VAT; alarm panel work extra
Free-swing door closer linked to the fire alarm£395 – £895per door, fitted, ex VAT

Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.

Standards and rules in England

Fire doors that are held open must close automatically when the fire alarm operates. Where hold-open devices can be used is decided by the fire risk assessment, which is the job of the responsible person under the Regulatory Reform (Fire Safety) Order 2005.

Hold-open devices and door release units linked to the fire alarm need regular testing as part of the building’s fire safety checks, and the results should be recorded.

How it works

  1. Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for fire door hold-open devices and book a survey in Nailsea.
  2. Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
  3. Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
  4. Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.

Ask for a hold-open survey in Nailsea. We will check each door and the alarm system, then quote a fixed price with the right device for every opening.

Fire door hold-open devices in Nailsea: questions

Can you work with the fire alarm company that maintains our system in Nailsea?

Yes, and for wired devices we usually need to. The connection at the alarm panel is made by, or agreed with, the engineer who looks after your alarm. We share the device details with them and agree the visits, so the alarm and the doors can be tested together once the work is finished.

What will fire door hold-open devices in Nailsea cost?

Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Nailsea confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Are battery hold-open units a good choice for older buildings in Nailsea?

Often they are. Radio and acoustic battery units avoid long cable runs, which helps in older or listed buildings and finished corridors. Acoustic units are only suitable where the fire risk assessment allows them and the alarm can be heard clearly at the door. Batteries need replacing at the interval the maker states.

Will you test the hold-open devices before leaving our site in Nailsea?

Yes. Every door is released from fully open and checked to close and latch. Where the alarm connection is complete, the doors are also tested with the alarm itself. You receive a schedule of the doors and devices fitted, ready to keep with your fire safety records and weekly alarm test log.

Do I need permission from a landlord or the council before work in Nailsea?

It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.

How much disruption should we expect while the work is done in Nailsea?

Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.

Do businesses in Nailsea have to fit automatic doors?

No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.

Next step

Fire door hold-open devices in Nailsea

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.