Covering Nailsea and nearby
We do not keep premises in Nailsea. Instead, enquiries about automatic internal doors come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the BS48 postcode district on a date that suits the site.
Parking on a busy high street can be tight. When work is booked in Nailsea, the engineer's arrival is planned around loading restrictions, any market days and opening hours, so the visit causes as little disruption as possible.
Nearby towns we also list for automatic internal doors (straight-line distance): Portishead (3.5 miles), Clevedon (4.3 miles), Clifton (6.3 miles), Bedminster (6.7 miles), Bristol (7.1 miles), Caldicot (10.7 miles).
What to think about for automatic internal doors in Nailsea
- Each automated door needs power at the head. In older buildings in Nailsea, running new supplies through finished corridors can be a significant part of the cost.
- Measure what passes through the door, not just the door. Beds, hoists, trolleys and catering equipment can need a wider opening than the current door gives.
- Offices in Nailsea with open-plan floors often have corridor fire doors that are held open by wedges. A proper hold-open device or operator removes the wedge and keeps the door working as a fire door.
- Plan the work around the building's routine. Clinical areas, classrooms and kitchens in Nailsea may need out-of-hours working, which should be agreed and priced up front.
- Doors linked to the fire alarm need a signal from the alarm panel. Allow time for your fire alarm contractor to provide the connection and test it with us.
Automatic internal doors in Nailsea: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Swing operator on an existing internal door | £1,795 – £3,995 | low-energy or full-energy, installed, ex VAT |
| Operators on a pair of cross-corridor doors | £3,795 – £6,495 | installed, ex VAT |
| Internal single-slide automatic door set | £4,495 – £7,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Nailsea.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Planning a refurbishment in Nailsea? Get in touch early and we will quote the internal doors with the rest of the works.
Automatic internal doors in Nailsea: questions
Can you automate the corridor doors in our care home in Nailsea?
Yes. We survey each door, including its fire rating, hinges, frame and power, and quote a fixed price. Doors can be set to open gently and slowly, with extra safety sensors where residents are frail. Work is planned around your care routines and agreed with the home manager.
What price range should I expect for automatic internal doors in Nailsea?
Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Nailsea confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can our cross-corridor fire doors in Nailsea be held open?
Yes, using hold-open devices or fire-rated operators linked to the fire alarm, so the doors close when the alarm operates. We check the doors' condition and ratings first. Any change to how fire doors behave should be agreed with whoever holds your fire risk assessment.
How disruptive is the work in an occupied building in Nailsea?
Usually less than people expect. Most swing operators take half a day to a day per door, and sliding doors a little longer. We plan the order of work to keep routes open, control dust, and agree any out-of-hours working in the quote.
What does the written quote for automatic internal doors in Nailsea include?
The quote lists each item separately: the door or equipment, installation, electrical connections where we provide them, removal of anything being replaced, testing and handover. It is a fixed price for the work described, so it does not change unless the scope changes, and any change is agreed with you in writing first.
What is the lead time for automatic internal doors in Nailsea?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
Which building regulations apply to a new automatic entrance in Nailsea?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.