Coverage across Lincolnshire
We treat Lincolnshire as one service area for fire door hold-open devices, so a site on the edge of the area gets the same written pricing and the same standard of work as one in the busiest town centre. Specialist automatic door engineers working under our management carry out each visit. Choose from the 12 towns below, or contact us with any address.
Towns listed in Lincolnshire: Lincoln, Grimsby, Scunthorpe, Boston, Grantham, Cleethorpes, Spalding, Skegness, Stamford, Gainsborough, Louth, Sleaford.
What to think about for fire door hold-open devices in Lincolnshire
- Schools and colleges in Lincolnshire may want hold-open devices fitted during the holidays so corridors are not disrupted in term time. Fitting can be planned around term dates.
- Fire doors on stairs and protected escape routes need particular care. The fire risk assessment may allow some of them to be held open and not others, so pricing is door by door.
- Listed buildings and conservation areas can make new cable runs difficult. Radio-triggered battery units avoid most wiring, although the transmitter still needs a connection at the alarm panel.
- Doors that open too far from a wall for a wall magnet can use a floor-mounted unit or a magnet on an extension arm. The survey measures where each door rests when open.
- Care homes in Lincolnshire usually want bedroom doors that residents can open easily. Free-swing closers suit this, provided the evacuation strategy for the home supports them.
Fire door hold-open devices in Lincolnshire: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Battery acoustic hold-open unit | £145 – £295 | per door, fitted, ex VAT |
| Hard-wired hold-open magnet linked to the fire alarm | £245 – £595 | per door, ex VAT; alarm panel work extra |
| Free-swing door closer linked to the fire alarm | £395 – £895 | per door, fitted, ex VAT |
Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.
Standards and rules in England
Fire doors that are held open must close automatically when the fire alarm operates. Where hold-open devices can be used is decided by the fire risk assessment, which is the job of the responsible person under the Regulatory Reform (Fire Safety) Order 2005.
Hold-open devices and door release units linked to the fire alarm need regular testing as part of the building’s fire safety checks, and the results should be recorded.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for fire door hold-open devices and book a survey in Lincolnshire.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Ask for a hold-open survey in Lincolnshire. We will check each door and the alarm system, then quote a fixed price with the right device for every opening.
Fire door hold-open devices in Lincolnshire: questions
Do care homes in Lincolnshire use free-swing closers?
Many do. A free-swing closer lets residents open their bedroom door without pushing against a closer, and it still shuts the door when the fire alarm operates. Whether it suits each room depends on the home's fire risk assessment and evacuation strategy, which we read before recommending any device.
What price range should I expect for fire door hold-open devices in Lincolnshire?
Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Lincolnshire confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Are battery hold-open units a good choice for older buildings in Lincolnshire?
Often they are. Radio and acoustic battery units avoid long cable runs, which helps in older or listed buildings and finished corridors. Acoustic units are only suitable where the fire risk assessment allows them and the alarm can be heard clearly at the door. Batteries need replacing at the interval the maker states.
Will you test the hold-open devices before leaving our site in Lincolnshire?
Yes. Every door is released from fully open and checked to close and latch. Where the alarm connection is complete, the doors are also tested with the alarm itself. You receive a schedule of the doors and devices fitted, ready to keep with your fire safety records and weekly alarm test log.
Is there a warranty on fire door hold-open devices?
Yes. The warranty terms for the equipment and the installation are set out in your written quote, so you can see exactly what is covered before you accept. Keeping the door serviced at the recommended intervals helps keep it in good order, and the quote explains any conditions that apply to the warranty.
Do I need permission from a landlord or the council before work in Lincolnshire?
It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.
Who is responsible for automatic doors on escape routes in Lincolnshire?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.