Coverage across the East Riding of Yorkshire
Wherever you are in the East Riding of Yorkshire, we need the same three things to get started on fire door hold-open devices: a short description of the door, a few photos if you have them, and the address. From there we agree the price in writing and book a specialist engineer working under our management. Every town listed below has a page of its own, 5 in total.
Towns listed in the East Riding of Yorkshire: Hull, Bridlington, Beverley, Goole, Cottingham.
What to think about for fire door hold-open devices in the East Riding of Yorkshire
- Doors that open too far from a wall for a wall magnet can use a floor-mounted unit or a magnet on an extension arm. The survey measures where each door rests when open.
- Background noise matters for acoustic units. Kitchens, plant areas and busy receptions may be too loud for a unit that listens for the alarm, so a wired or radio device is often better there.
- Older buildings in the East Riding of Yorkshire may have fire doors that no longer close fully on their own. A hold-open device cannot fix that, so the survey checks closers, hinges and latches first.
- If the alarm panel has no spare outputs, a relay or an extra interface may be needed. Your alarm engineer can confirm this, and it is added to the quote once agreed.
- Busy office corridors suit wall magnets that hold doors right back against the wall, out of the way of people and trolleys, until the alarm releases them.
Fire door hold-open devices in the East Riding of Yorkshire: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Battery acoustic hold-open unit | £145 – £295 | per door, fitted, ex VAT |
| Hard-wired hold-open magnet linked to the fire alarm | £245 – £595 | per door, ex VAT; alarm panel work extra |
| Free-swing door closer linked to the fire alarm | £395 – £895 | per door, fitted, ex VAT |
Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.
Standards and rules in England
Fire doors that are held open must close automatically when the fire alarm operates. Where hold-open devices can be used is decided by the fire risk assessment, which is the job of the responsible person under the Regulatory Reform (Fire Safety) Order 2005.
Hold-open devices and door release units linked to the fire alarm need regular testing as part of the building’s fire safety checks, and the results should be recorded.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
- Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
- Quote in writing. You receive a fixed, itemised quote for fire door hold-open devices in the East Riding of Yorkshire, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
- Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.
Ready to stop wedging fire doors open in the East Riding of Yorkshire? Book a free survey and get a fixed, itemised quote for every door that needs a hold-open device.
Fire door hold-open devices in the East Riding of Yorkshire: questions
Which doors in my building in the East Riding of Yorkshire can be held open?
That is decided by the fire risk assessment for the building, not by the installer. Many corridor, lounge and office doors can be held open on a device that releases on the alarm, while some stair and escape route doors cannot. If the assessment is unclear, check with your assessor before we finalise the quote.
What do you charge for fire door hold-open devices in the East Riding of Yorkshire?
Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in the East Riding of Yorkshire confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
How soon can hold-open devices be fitted in the East Riding of Yorkshire?
Once the quote is accepted, supply is typically 1 to 3 weeks, and fitting a few devices on one floor usually takes a day. Larger jobs are planned in stages so doors are never left without protection. Your quote shows the expected programme, and fitting dates are agreed with you before work starts.
Do you fit fire door hold-open devices in the East Riding of Yorkshire?
Yes. We arrange surveys and installations in the East Riding of Yorkshire through specialist engineers working under our management. They look at each door, its closer and the alarm system, recommend a device for each door and we send a fixed, itemised quote. The survey costs you nothing, and you are under no obligation to accept the quote.
What does the free site survey in the East Riding of Yorkshire involve?
An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for fire door hold-open devices, with drawings where the door type needs them.
Is there a warranty on fire door hold-open devices?
Yes. The warranty terms for the equipment and the installation are set out in your written quote, so you can see exactly what is covered before you accept. Keeping the door serviced at the recommended intervals helps keep it in good order, and the quote explains any conditions that apply to the warranty.
Who is responsible for automatic doors on escape routes in the East Riding of Yorkshire?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.