UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Fire door hold-open devices · Buckinghamshire

Fire door hold-open devices in Aylesbury

Fire risk assessments in Aylesbury often flag wedged-open fire doors as an action. We can close that action off with hold-open devices that release on the fire alarm, fitted and tested on each door, with a schedule of devices for your fire safety records.

Town
Aylesbury
Area
Buckinghamshire
Postcodes
HP19, HP20, HP21
Guide price
From £145 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Aylesbury and nearby

Engineers working under our management travel to addresses across the HP19, HP20 and HP21 postcode districts for fire door hold-open devices. There is no depot or showroom in Aylesbury; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.

Supermarkets and larger stores in and around Aylesbury often trade long hours, so work on their entrances is usually planned for early mornings or late evenings. Where a store has more than one entrance, keeping one in use while the other is worked on is part of the plan.

Nearby towns we also list for fire door hold-open devices (straight-line distance): Leighton Buzzard (9.6 miles), Berkhamsted (11.3 miles), Chesham (12.2 miles), Bletchley (12.7 miles), High Wycombe (13.3 miles), Dunstable (13.3 miles).

What to think about for fire door hold-open devices in Aylesbury

  • Hard-wired magnets need a power supply near each door. In buildings in Aylesbury where that is awkward, battery units avoid running new cables along finished corridors.
  • Think about who tests the fire alarm each week at your building in Aylesbury. Adding a walk past the held-open doors to that test is the easiest way to confirm they release.
  • Older buildings in Aylesbury may have fire doors that no longer close fully on their own. A hold-open device cannot fix that, so the survey checks closers, hinges and latches first.
  • Listed buildings and conservation areas can make new cable runs difficult. Radio-triggered battery units avoid most wiring, although the transmitter still needs a connection at the alarm panel.
  • Doors that open too far from a wall for a wall magnet can use a floor-mounted unit or a magnet on an extension arm. The survey measures where each door rests when open.

Fire door hold-open devices in Aylesbury: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.

ItemGuide priceNotes
Battery acoustic hold-open unit£145 – £295per door, fitted, ex VAT
Hard-wired hold-open magnet linked to the fire alarm£245 – £595per door, ex VAT; alarm panel work extra
Free-swing door closer linked to the fire alarm£395 – £895per door, fitted, ex VAT

Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.

Standards and rules in England

Fire doors that are held open must close automatically when the fire alarm operates. Where hold-open devices can be used is decided by the fire risk assessment, which is the job of the responsible person under the Regulatory Reform (Fire Safety) Order 2005.

Hold-open devices and door release units linked to the fire alarm need regular testing as part of the building’s fire safety checks, and the results should be recorded.

How it works

  1. Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
  2. Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
  3. Quote in writing. You receive a fixed, itemised quote for fire door hold-open devices in Aylesbury, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
  4. Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.

Send us a list of the doors you want held open at your building in Aylesbury, plus any notes from your fire risk assessment, and we will arrange a survey at no cost.

Fire door hold-open devices in Aylesbury: questions

Do care homes in Aylesbury use free-swing closers?

Many do. A free-swing closer lets residents open their bedroom door without pushing against a closer, and it still shuts the door when the fire alarm operates. Whether it suits each room depends on the home's fire risk assessment and evacuation strategy, which we read before recommending any device.

What is the guide price for fire door hold-open devices in Aylesbury?

Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Aylesbury confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Are battery hold-open units a good choice for older buildings in Aylesbury?

Often they are. Radio and acoustic battery units avoid long cable runs, which helps in older or listed buildings and finished corridors. Acoustic units are only suitable where the fire risk assessment allows them and the alarm can be heard clearly at the door. Batteries need replacing at the interval the maker states.

How soon can hold-open devices be fitted in Aylesbury?

Once the quote is accepted, supply is typically 1 to 3 weeks, and fitting a few devices on one floor usually takes a day. Larger jobs are planned in stages so doors are never left without protection. Your quote shows the expected programme, and fitting dates are agreed with you before work starts.

How are payments structured for work in Aylesbury?

Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.

What happens once the installation in Aylesbury is finished?

The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.

Who is responsible for automatic doors on escape routes in Aylesbury?

Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.

Next step

Fire door hold-open devices in Aylesbury

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.