UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automating an existing door · Worcestershire

Automating an existing door in Malvern

We automate existing doors in Malvern for businesses, public buildings and homes. The free survey checks the door, frame, hinges, glass and locks, and the fixed quote sets out the operator, safety devices and any work the door needs first.

Town
Malvern
Area
Worcestershire
Postcodes
WR14
Guide price
From £1,795 ex VAT (£2,154 inc VAT)
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Malvern and nearby

Engineers working under our management travel to addresses across the WR14 postcode district for automating an existing door. There is no depot or showroom in Malvern; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.

Parking on a busy high street can be tight. When work is booked in Malvern, the engineer's arrival is planned around loading restrictions, any market days and opening hours, so the visit causes as little disruption as possible.

Nearby towns we also list for automating an existing door (straight-line distance): Worcester (7.0 miles), Tewkesbury (10.8 miles), Droitwich Spa (13.0 miles), Stourport-on-Severn (15.9 miles), Evesham (16.0 miles), Ross-on-Wye (16.9 miles).

What to think about for automating an existing door in Malvern

  • If the door is on an escape route, keep the existing panic or emergency hardware working. The operator should not stop the door opening by hand in an emergency.
  • Listed buildings and conservation areas in Malvern may need consent for an operator on an original door. Mounting it on the inside face usually keeps the street view the same.
  • Schools and community buildings in Malvern may prefer the work done in holidays or after hours. Ask for any out-of-hours working to be priced in the quote.
  • Older buildings in Malvern often have heavy timber doors on floor springs. Some floor springs can be adapted, but many need replacing with hinges, which adds to the cost.
  • Check how the door hangs now. A door that drops, rubs on the floor or needs a shoulder to close will need its hinges or frame sorted before an operator goes on.

Automating an existing door in Malvern: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT (£2,154 inc VAT).

ItemGuide priceNotes
Low-energy operator on an existing swing door£1,795 – £2,995installed, ex VAT; homes £2,154 – £3,594 inc VAT
Full-energy operator on an existing swing door, with safety sensors£2,495 – £3,995installed, ex VAT; homes £2,994 – £4,794 inc VAT
Operators on an existing pair of swing doors£3,795 – £6,495installed, ex VAT; homes £4,554 – £7,794 inc VAT
Automating an existing manual sliding door or screen£2,995 – £5,495installed, ex VAT; homes £3,594 – £6,594 inc VAT

Standards and rules in England

Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.

Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.

How it works

  1. Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Malvern.
  2. Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
  3. Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
  4. Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.

Ask us to look at the doors at your premises in Malvern. If a retrofit makes sense, you get a fixed quote, and if replacement is better, we explain why.

Automating an existing door in Malvern: questions

Can you automate the existing doors at our building in Malvern?

In most cases, yes. We check each door at a free survey, including the hinges, frame, glass, locks and power, and then quote a fixed price. If a door is not a good candidate, we explain why and what it would take to fix it, or quote a replacement instead.

What do you charge for automating an existing door in Malvern?

Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. For homes that is from £2,154 including VAT. The free site survey in Malvern confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Will automating our door in Malvern need planning permission?

Fitting an operator to an existing door does not usually need planning permission, but a listed building may need consent for fixings or new switches on the outside. In a conservation area, mounting the operator inside often avoids any change to the street view. Check with the planning authority if in doubt.

Can you look after the door in Malvern once it is automated?

Yes. We can arrange servicing at intervals that suit how much the door is used, with the operator, safety devices and hinges checked and a written record left. Each visit has its price confirmed in writing before an engineer attends.

Can installation in Malvern happen outside opening hours?

Yes. Many shops, surgeries and offices prefer work early in the morning, in the evening or at weekends, when the entrance is quietest. Tell us your constraints when you enquire and they are built into the plan. Any extra cost for out-of-hours work is shown in the written quote rather than added afterwards.

Is there a warranty on automating an existing door?

Yes. The warranty terms for the equipment and the installation are set out in your written quote, so you can see exactly what is covered before you accept. Keeping the door serviced at the recommended intervals helps keep it in good order, and the quote explains any conditions that apply to the warranty.

Do businesses in Malvern have to fit automatic doors?

No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.

Next step

Automating an existing door in Malvern

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.