Covering Chippenham and nearby
For automating an existing door, coverage around Chippenham is set by postcode and includes the SN15 postcode district, as well as nearby addresses in Wiltshire. Specialist engineers working under our management attend each site, and the price is agreed in writing beforehand.
Many buildings in Chippenham are older, with timber frames, thick walls, steps or uneven thresholds. These affect where an operator and sensors can go, and the engineer checks them on site before anything is fitted or adjusted.
Nearby towns we also list for automating an existing door (straight-line distance): Calne (5.3 miles), Melksham (6.1 miles), Trowbridge (10.4 miles), Bath (11.8 miles), Yate (13.8 miles), Swindon (16.3 miles).
What to think about for automating an existing door in Chippenham
- Shop fronts on high streets in Chippenham often have narrow aluminium frames. The survey checks the transom can carry the operator without flexing, and whether it needs reinforcing.
- If the door is on an escape route, keep the existing panic or emergency hardware working. The operator should not stop the door opening by hand in an emergency.
- Older buildings in Chippenham often have heavy timber doors on floor springs. Some floor springs can be adapted, but many need replacing with hinges, which adds to the cost.
- Doors facing the weather in exposed parts of Chippenham are pushed about by wind. The survey checks whether a low-energy operator will cope or a stronger unit is needed.
- Schools and community buildings in Chippenham may prefer the work done in holidays or after hours. Ask for any out-of-hours working to be priced in the quote.
Automating an existing door in Chippenham: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT (£2,154 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Low-energy operator on an existing swing door | £1,795 – £2,995 | installed, ex VAT; homes £2,154 – £3,594 inc VAT |
| Full-energy operator on an existing swing door, with safety sensors | £2,495 – £3,995 | installed, ex VAT; homes £2,994 – £4,794 inc VAT |
| Operators on an existing pair of swing doors | £3,795 – £6,495 | installed, ex VAT; homes £4,554 – £7,794 inc VAT |
| Automating an existing manual sliding door or screen | £2,995 – £5,495 | installed, ex VAT; homes £3,594 – £6,594 inc VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for automating an existing door and book a survey in Chippenham.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Send us a photo of the door and we will arrange a free survey in Chippenham to confirm whether it can be automated, followed by a fixed quote.
Automating an existing door in Chippenham: questions
How long will our door in Chippenham be out of use?
Usually half a day to a day per door. Where hinges, locks or glass are being changed as well, it can take longer. We plan the work so the building stays usable, and agree any out-of-hours working in the quote.
Can you give me a price for automating an existing door in Chippenham?
Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. For homes that is from £2,154 including VAT. The free site survey in Chippenham confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you look after the door in Chippenham once it is automated?
Yes. We can arrange servicing at intervals that suit how much the door is used, with the operator, safety devices and hinges checked and a written record left. Each visit has its price confirmed in writing before an engineer attends.
Do you provide the paperwork for an automated door in Chippenham?
Yes. Motorising a manual door brings manufacturer's duties for the completed powered door, so when we automate a door we provide the risk assessment, test record, settings and conformity paperwork at handover. Keep them with your building records, as insurers, inspectors and future service engineers may ask to see them.
What should I send before the survey in Chippenham?
A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for automating an existing door together more easily.
What power supply is needed for automating an existing door in Chippenham?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Can a home in Chippenham get help paying for a door opener?
Possibly. In England a Disabled Facilities Grant of up to £30,000 can fund adaptations that make it easier to get in and out of a home. It is means-tested and must be approved by the council before work starts, so ask your council and occupational therapist.