Covering Leeds and nearby
Homes, businesses and public buildings throughout the LS1, LS2, LS3, LS4, LS6 and LS13 postcode districts can arrange automating an existing door with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Leeds for the job rather than working from premises in town.
Mixed-use buildings in Leeds, with shops at street level and offices or flats above, often share an entrance or a fire route. Doors in those settings have to suit several users at once, and the managing agent or landlord is usually involved in approving work.
Nearby towns we also list for automating an existing door (straight-line distance): Rothwell (4.4 miles), Morley (4.4 miles), Pudsey (4.6 miles), Horsforth (4.9 miles), Batley (7.4 miles), Yeadon (7.4 miles).
What to think about for automating an existing door in Leeds
- Think about how the door is locked. If it is locked by key every night, an electric lock or keep may be worth adding so the door can be secured without switching the operator off.
- Older buildings in Leeds often have heavy timber doors on floor springs. Some floor springs can be adapted, but many need replacing with hinges, which adds to the cost.
- Power is needed at the head of the door. If there is no supply close by, an electrician will need to run one, ideally hidden in trunking or the wall.
- Check how the door hangs now. A door that drops, rubs on the floor or needs a shoulder to close will need its hinges or frame sorted before an operator goes on.
- Find out whether the door is a fire door. If it is, the operator must suit fire doors and be wired so the door closes when the alarm sounds.
Automating an existing door in Leeds: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT (£2,154 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Low-energy operator on an existing swing door | £1,795 – £2,995 | installed, ex VAT; homes £2,154 – £3,594 inc VAT |
| Full-energy operator on an existing swing door, with safety sensors | £2,495 – £3,995 | installed, ex VAT; homes £2,994 – £4,794 inc VAT |
| Operators on an existing pair of swing doors | £3,795 – £6,495 | installed, ex VAT; homes £4,554 – £7,794 inc VAT |
| Automating an existing manual sliding door or screen | £2,995 – £5,495 | installed, ex VAT; homes £3,594 – £6,594 inc VAT |
Standards and rules in England
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for automating an existing door and book a survey in Leeds.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Send us a photo of the door and we will arrange a free survey in Leeds to confirm whether it can be automated, followed by a fixed quote.
Automating an existing door in Leeds: questions
How long will our door in Leeds be out of use?
Usually half a day to a day per door. Where hinges, locks or glass are being changed as well, it can take longer. We plan the work so the building stays usable, and agree any out-of-hours working in the quote.
How are prices worked out for automating an existing door in Leeds?
Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. For homes that is from £2,154 including VAT. The free site survey in Leeds confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you provide the paperwork for an automated door in Leeds?
Yes. Motorising a manual door brings manufacturer's duties for the completed powered door, so when we automate a door we provide the risk assessment, test record, settings and conformity paperwork at handover. Keep them with your building records, as insurers, inspectors and future service engineers may ask to see them.
Will automating our door in Leeds need planning permission?
Fitting an operator to an existing door does not usually need planning permission, but a listed building may need consent for fixings or new switches on the outside. In a conservation area, mounting the operator inside often avoids any change to the street view. Check with the planning authority if in doubt.
What is the lead time for automating an existing door in Leeds?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
What happens once the installation in Leeds is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Which building regulations apply to a new automatic entrance in Leeds?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.