UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automating an existing door · Stirling, Falkirk and Clackmannanshire

Automating an existing door in Grangemouth

Before any operator goes on a door in Grangemouth, we check whether the door is worth automating. Sometimes new hinges or a lock are all it needs. Sometimes replacement is better value, and we will say so.

Town
Grangemouth
Area
Stirling, Falkirk and Clackmannanshire
Postcodes
FK3
Guide price
From £1,795 ex VAT (£2,154 inc VAT)
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Grangemouth and nearby

Addresses anywhere in the FK3 postcode district can book automating an existing door through us. The engineer who attends works under our management and travels to the site. There is no branch in Grangemouth, so the price, the booking and the paperwork all come from one place.

GP surgeries, dental practices and pharmacies in Grangemouth often serve older patients and people with limited mobility. A low-energy swing operator, or a gentle sliding door with a push pad, can make a real difference at entrances like these.

Nearby towns we also list for automating an existing door (straight-line distance): Falkirk (2.5 miles), Stenhousemuir (3.7 miles), Bo'ness (4.1 miles), Larbert (4.2 miles), Linlithgow (5.2 miles), Alloa (7.7 miles).

What to think about for automating an existing door in Grangemouth

  • Check how the door hangs now. A door that drops, rubs on the floor or needs a shoulder to close will need its hinges or frame sorted before an operator goes on.
  • If the door is on an escape route, keep the existing panic or emergency hardware working. The operator should not stop the door opening by hand in an emergency.
  • Think about how the door is locked. If it is locked by key every night, an electric lock or keep may be worth adding so the door can be secured without switching the operator off.
  • Glass in a door that will be automated should be safety glass. Older doors in Grangemouth may have panes that need replacing before the work goes ahead.
  • Homes in Grangemouth with uPVC or composite doors can usually be automated, but the multipoint lock needs to work smoothly first. A stiff lock is best fixed before fitting.

Automating an existing door in Grangemouth: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT (£2,154 inc VAT).

ItemGuide priceNotes
Low-energy operator on an existing swing door£1,795 – £2,995installed, ex VAT; homes £2,154 – £3,594 inc VAT
Full-energy operator on an existing swing door, with safety sensors£2,495 – £3,995installed, ex VAT; homes £2,994 – £4,794 inc VAT
Operators on an existing pair of swing doors£3,795 – £6,495installed, ex VAT; homes £4,554 – £7,794 inc VAT
Automating an existing manual sliding door or screen£2,995 – £5,495installed, ex VAT; homes £3,594 – £6,594 inc VAT

Standards and rules in Scotland

Under the Equality Act 2010, service providers and employers in Scotland must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.

Scottish building standards guidance (the non-domestic Technical Handbook) expects an accessible entrance door to give a clear opening of at least 800 mm, says powered doors improve accessibility as long as they add no new hazard, and expects signage, sensors that hold the door open long enough, and guarding against collision or entrapment.

How it works

  1. Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for automating an existing door and book a survey in Grangemouth.
  2. Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
  3. Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
  4. Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.

Send us a photo of the door and we will arrange a free survey in Grangemouth to confirm whether it can be automated, followed by a fixed quote.

Automating an existing door in Grangemouth: questions

Do you provide the paperwork for an automated door in Grangemouth?

Yes. Motorising a manual door brings manufacturer's duties for the completed powered door, so when we automate a door we provide the risk assessment, test record, settings and conformity paperwork at handover. Keep them with your building records, as insurers, inspectors and future service engineers may ask to see them.

What is the guide price for automating an existing door in Grangemouth?

Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. For homes that is from £2,154 including VAT. The free site survey in Grangemouth confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Can you automate the existing doors at our building in Grangemouth?

In most cases, yes. We check each door at a free survey, including the hinges, frame, glass, locks and power, and then quote a fixed price. If a door is not a good candidate, we explain why and what it would take to fix it, or quote a replacement instead.

Can you look after the door in Grangemouth once it is automated?

Yes. We can arrange servicing at intervals that suit how much the door is used, with the operator, safety devices and hinges checked and a written record left. Each visit has its price confirmed in writing before an engineer attends.

What happens once the installation in Grangemouth is finished?

The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.

Is there a warranty on automating an existing door?

Yes. The warranty terms for the equipment and the installation are set out in your written quote, so you can see exactly what is covered before you accept. Keeping the door serviced at the recommended intervals helps keep it in good order, and the quote explains any conditions that apply to the warranty.

Can a home in Grangemouth get help paying for a door opener?

Scotland does not have Disabled Facilities Grants. Councils help through their Scheme of Assistance, which can include a grant for essential permanent adaptations. Ask your council whether a powered door opener could be included.

Next step

Automating an existing door in Grangemouth

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.