Covering Welshpool and nearby
Coverage for automating an existing door runs across the SY21 postcode district and out into the surrounding parts of Powys. Wherever the building is, the arrangements stay the same: one contracting party, a written price before work, and a specialist engineer working under our management on site.
Doors at quieter sites in Welshpool and elsewhere in Powys can go many years between checks. A safety inspection looks at how the sensors, closing behaviour and emergency functions are working, and gives you a written record to keep on file.
Nearby towns we also list for automating an existing door (straight-line distance): Newtown (11.8 miles), Oswestry (14.5 miles), Shrewsbury (16.9 miles), Rhosllannerchrugog (24.5 miles), Wellington (26.6 miles), Wrexham (27.5 miles).
What to think about for automating an existing door in Welshpool
- Power is needed at the head of the door. If there is no supply close by, an electrician will need to run one, ideally hidden in trunking or the wall.
- Homes in Welshpool with uPVC or composite doors can usually be automated, but the multipoint lock needs to work smoothly first. A stiff lock is best fixed before fitting.
- Find out whether the door is a fire door. If it is, the operator must suit fire doors and be wired so the door closes when the alarm sounds.
- Glass in a door that will be automated should be safety glass. Older doors in Welshpool may have panes that need replacing before the work goes ahead.
- Listed buildings and conservation areas in Welshpool may need consent for an operator on an original door. Mounting it on the inside face usually keeps the street view the same.
Automating an existing door in Welshpool: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT (£2,154 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Low-energy operator on an existing swing door | £1,795 – £2,995 | installed, ex VAT; homes £2,154 – £3,594 inc VAT |
| Full-energy operator on an existing swing door, with safety sensors | £2,495 – £3,995 | installed, ex VAT; homes £2,994 – £4,794 inc VAT |
| Operators on an existing pair of swing doors | £3,795 – £6,495 | installed, ex VAT; homes £4,554 – £7,794 inc VAT |
| Automating an existing manual sliding door or screen | £2,995 – £5,495 | installed, ex VAT; homes £3,594 – £6,594 inc VAT |
Standards and rules in Wales
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Under the Equality Act 2010, service providers and employers in Wales must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for automating an existing door and book a survey in Welshpool.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Ask us to look at the doors at your premises in Welshpool. If a retrofit makes sense, you get a fixed quote, and if replacement is better, we explain why.
Automating an existing door in Welshpool: questions
Can you look after the door in Welshpool once it is automated?
Yes. We can arrange servicing at intervals that suit how much the door is used, with the operator, safety devices and hinges checked and a written record left. Each visit has its price confirmed in writing before an engineer attends.
How are prices worked out for automating an existing door in Welshpool?
Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. For homes that is from £2,154 including VAT. The free site survey in Welshpool confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you provide the paperwork for an automated door in Welshpool?
Yes. Motorising a manual door brings manufacturer's duties for the completed powered door, so when we automate a door we provide the risk assessment, test record, settings and conformity paperwork at handover. Keep them with your building records, as insurers, inspectors and future service engineers may ask to see them.
Can you automate a fire door at our premises in Welshpool?
Usually, using an operator designed for fire doors and wired to the fire alarm so the door closes when the alarm operates. We check the door's rating and condition first. A fire door that does not close and seal properly needs repairing before an operator goes on.
What happens once the installation in Welshpool is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Is there a warranty on automating an existing door?
Yes. The warranty terms for the equipment and the installation are set out in your written quote, so you can see exactly what is covered before you accept. Keeping the door serviced at the recommended intervals helps keep it in good order, and the quote explains any conditions that apply to the warranty.
Who is responsible for automatic doors on escape routes in Welshpool?
The responsible person under the Regulatory Reform (Fire Safety) Order 2005. Automatic doors on an escape route need fail-safe opening or break-out, and sliding or revolving doors must not be used for exits specifically intended as emergency exits.