Covering Wrexham and nearby
From shops and surgeries to schools, care homes and private houses, any building in the LL13 postcode district can be covered for automating an existing door. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Housing providers and managing agents in Wrexham look after communal entrance doors that are used day and night. Reliable closing, good security and a written service record are usually the priorities, along with door entry or fob systems tied into the operator.
Nearby towns we also list for automating an existing door (straight-line distance): Rhosllannerchrugog (3.8 miles), Buckley (9.1 miles), Mold (10.4 miles), Chester (10.8 miles), Connah's Quay (11.1 miles), Oswestry (13.0 miles).
What to think about for automating an existing door in Wrexham
- Think about how the door is locked. If it is locked by key every night, an electric lock or keep may be worth adding so the door can be secured without switching the operator off.
- Schools and community buildings in Wrexham may prefer the work done in holidays or after hours. Ask for any out-of-hours working to be priced in the quote.
- Older buildings in Wrexham often have heavy timber doors on floor springs. Some floor springs can be adapted, but many need replacing with hinges, which adds to the cost.
- Find out whether the door is a fire door. If it is, the operator must suit fire doors and be wired so the door closes when the alarm sounds.
- Shop fronts on high streets in Wrexham often have narrow aluminium frames. The survey checks the transom can carry the operator without flexing, and whether it needs reinforcing.
Automating an existing door in Wrexham: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT (£2,154 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Low-energy operator on an existing swing door | £1,795 – £2,995 | installed, ex VAT; homes £2,154 – £3,594 inc VAT |
| Full-energy operator on an existing swing door, with safety sensors | £2,495 – £3,995 | installed, ex VAT; homes £2,994 – £4,794 inc VAT |
| Operators on an existing pair of swing doors | £3,795 – £6,495 | installed, ex VAT; homes £4,554 – £7,794 inc VAT |
| Automating an existing manual sliding door or screen | £2,995 – £5,495 | installed, ex VAT; homes £3,594 – £6,594 inc VAT |
Standards and rules in Wales
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Wales has its own building regulations guidance. Approved Document M (Wales) uses a lower opening-force limit than England, 20 N at the leading edge, before a powered door is called for, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
- Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
- Quote in writing. You receive a fixed, itemised quote for automating an existing door in Wrexham, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
- Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.
Want to automate an existing door in Wrexham? Start with a free survey, and decide once you have the fixed, itemised quote in front of you.
Automating an existing door in Wrexham: questions
Can you automate the existing doors at our building in Wrexham?
In most cases, yes. We check each door at a free survey, including the hinges, frame, glass, locks and power, and then quote a fixed price. If a door is not a good candidate, we explain why and what it would take to fix it, or quote a replacement instead.
What do you charge for automating an existing door in Wrexham?
Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. For homes that is from £2,154 including VAT. The free site survey in Wrexham confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you provide the paperwork for an automated door in Wrexham?
Yes. Motorising a manual door brings manufacturer's duties for the completed powered door, so when we automate a door we provide the risk assessment, test record, settings and conformity paperwork at handover. Keep them with your building records, as insurers, inspectors and future service engineers may ask to see them.
Can you automate a fire door at our premises in Wrexham?
Usually, using an operator designed for fire doors and wired to the fire alarm so the door closes when the alarm operates. We check the door's rating and condition first. A fire door that does not close and seal properly needs repairing before an operator goes on.
What do you need from us for parking and access in Wrexham?
Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.
What does the free site survey in Wrexham involve?
An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for automating an existing door, with drawings where the door type needs them.
Are the rules for automatic doors different in Wales?
Some are. Wales has its own building regulations guidance: Approved Document M (Wales) calls for a powered door where opening a self-closing entrance door would need more than 20 N, lower than the figure used in England. Fire law (the Regulatory Reform (Fire Safety) Order 2005) and the Equality Act 2010 apply as in England.