Covering Pencoed and nearby
From shops and surgeries to schools, care homes and private houses, any building in the CF35 postcode district can be covered for automating an existing door. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Older shopfronts are common in market towns, and some in Pencoed may sit in a conservation area or a listed building. Changes to a frontage can need planning permission or listed building consent, so it is worth checking with the local planning authority before work is booked.
Nearby towns we also list for automating an existing door (straight-line distance): Bridgend (3.5 miles), Tonyrefail (5.1 miles), Porth (7.4 miles), Llantwit Major (7.8 miles), Pontypridd (8.7 miles), Maesteg (9.0 miles).
What to think about for automating an existing door in Pencoed
- Power is needed at the head of the door. If there is no supply close by, an electrician will need to run one, ideally hidden in trunking or the wall.
- Older buildings in Pencoed often have heavy timber doors on floor springs. Some floor springs can be adapted, but many need replacing with hinges, which adds to the cost.
- Glass in a door that will be automated should be safety glass. Older doors in Pencoed may have panes that need replacing before the work goes ahead.
- If the door is on an escape route, keep the existing panic or emergency hardware working. The operator should not stop the door opening by hand in an emergency.
- Find out whether the door is a fire door. If it is, the operator must suit fire doors and be wired so the door closes when the alarm sounds.
Automating an existing door in Pencoed: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT (£2,154 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Low-energy operator on an existing swing door | £1,795 – £2,995 | installed, ex VAT; homes £2,154 – £3,594 inc VAT |
| Full-energy operator on an existing swing door, with safety sensors | £2,495 – £3,995 | installed, ex VAT; homes £2,994 – £4,794 inc VAT |
| Operators on an existing pair of swing doors | £3,795 – £6,495 | installed, ex VAT; homes £4,554 – £7,794 inc VAT |
| Automating an existing manual sliding door or screen | £2,995 – £5,495 | installed, ex VAT; homes £3,594 – £6,594 inc VAT |
Standards and rules in Wales
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Wales has its own building regulations guidance. Approved Document M (Wales) uses a lower opening-force limit than England, 20 N at the leading edge, before a powered door is called for, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Describe what you need. Whether the job is automating an existing door for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Pencoed.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Tell us about the door, how it is used and who uses it, and we will plan a retrofit for your building in Pencoed.
Automating an existing door in Pencoed: questions
Can you automate the existing doors at our building in Pencoed?
In most cases, yes. We check each door at a free survey, including the hinges, frame, glass, locks and power, and then quote a fixed price. If a door is not a good candidate, we explain why and what it would take to fix it, or quote a replacement instead.
What price range should I expect for automating an existing door in Pencoed?
Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. For homes that is from £2,154 including VAT. The free site survey in Pencoed confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you provide the paperwork for an automated door in Pencoed?
Yes. Motorising a manual door brings manufacturer's duties for the completed powered door, so when we automate a door we provide the risk assessment, test record, settings and conformity paperwork at handover. Keep them with your building records, as insurers, inspectors and future service engineers may ask to see them.
Can you look after the door in Pencoed once it is automated?
Yes. We can arrange servicing at intervals that suit how much the door is used, with the operator, safety devices and hinges checked and a written record left. Each visit has its price confirmed in writing before an engineer attends.
What do you need from us for parking and access in Pencoed?
Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.
What does the written quote for automating an existing door in Pencoed include?
The quote lists each item separately: the door or equipment, installation, electrical connections where we provide them, removal of anything being replaced, testing and handover. It is a fixed price for the work described, so it does not change unless the scope changes, and any change is agreed with you in writing first.
Who is responsible for automatic doors on escape routes in Pencoed?
The responsible person under the Regulatory Reform (Fire Safety) Order 2005. Automatic doors on an escape route need fail-safe opening or break-out, and sliding or revolving doors must not be used for exits specifically intended as emergency exits.