UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automating an existing door · Mid Glamorgan

Automating an existing door in Bridgend

Shops, offices and schools in Bridgend often have aluminium or timber doors that are fine apart from the effort needed to open them. A retrofit operator removes that effort and leaves the frontage looking the same.

Town
Bridgend
Area
Mid Glamorgan
Postcodes
CF31
Guide price
From £1,795 ex VAT (£2,154 inc VAT)
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Bridgend and nearby

Homes, businesses and public buildings throughout the CF31 postcode district can arrange automating an existing door with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Bridgend for the job rather than working from premises in town.

In Bridgend, automatic door needs often centre on the high street: independent shops, pharmacies, banks, cafés and estate agents. Frontages are often narrow, so the choice is usually between a compact sliding door, a folding door or a swing operator on the existing door.

Nearby towns we also list for automating an existing door (straight-line distance): Pencoed (3.5 miles), Porthcawl (5.7 miles), Llantwit Major (7.6 miles), Maesteg (7.9 miles), Tonyrefail (8.3 miles), Porth (10.5 miles).

What to think about for automating an existing door in Bridgend

  • Find out whether the door is a fire door. If it is, the operator must suit fire doors and be wired so the door closes when the alarm sounds.
  • Check how the door hangs now. A door that drops, rubs on the floor or needs a shoulder to close will need its hinges or frame sorted before an operator goes on.
  • Think about how the door is locked. If it is locked by key every night, an electric lock or keep may be worth adding so the door can be secured without switching the operator off.
  • Power is needed at the head of the door. If there is no supply close by, an electrician will need to run one, ideally hidden in trunking or the wall.
  • If the door is on an escape route, keep the existing panic or emergency hardware working. The operator should not stop the door opening by hand in an emergency.

Automating an existing door in Bridgend: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT (£2,154 inc VAT).

ItemGuide priceNotes
Low-energy operator on an existing swing door£1,795 – £2,995installed, ex VAT; homes £2,154 – £3,594 inc VAT
Full-energy operator on an existing swing door, with safety sensors£2,495 – £3,995installed, ex VAT; homes £2,994 – £4,794 inc VAT
Operators on an existing pair of swing doors£3,795 – £6,495installed, ex VAT; homes £4,554 – £7,794 inc VAT
Automating an existing manual sliding door or screen£2,995 – £5,495installed, ex VAT; homes £3,594 – £6,594 inc VAT

Standards and rules in Wales

Wales has its own building regulations guidance. Approved Document M (Wales) uses a lower opening-force limit than England, 20 N at the leading edge, before a powered door is called for, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.

Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.

How it works

  1. Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Bridgend.
  2. Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
  3. Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
  4. Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.

Want to automate an existing door in Bridgend? Start with a free survey, and decide once you have the fixed, itemised quote in front of you.

Automating an existing door in Bridgend: questions

What if our door in Bridgend turns out to need replacing?

Then we will say so and explain why. If you want to go ahead, we can quote a new automatic door, or a new door ready for an operator. If both options are reasonable, we price each so you can choose, and the survey costs nothing either way.

What will automating an existing door in Bridgend cost?

Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. For homes that is from £2,154 including VAT. The free site survey in Bridgend confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Can you automate the existing doors at our building in Bridgend?

In most cases, yes. We check each door at a free survey, including the hinges, frame, glass, locks and power, and then quote a fixed price. If a door is not a good candidate, we explain why and what it would take to fix it, or quote a replacement instead.

Can you automate a front door at a house in Bridgend?

Yes. Front doors at home are often automated for wheelchair users and people with limited grip, usually with an electric keep or lock so the door locks itself as it closes. Home prices are quoted including VAT, and the survey is free.

What does the free site survey in Bridgend involve?

An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for automating an existing door, with drawings where the door type needs them.

What does the written quote for automating an existing door in Bridgend include?

The quote lists each item separately: the door or equipment, installation, electrical connections where we provide them, removal of anything being replaced, testing and handover. It is a fixed price for the work described, so it does not change unless the scope changes, and any change is agreed with you in writing first.

Do businesses in Bridgend have to fit automatic doors?

There is no blanket requirement. Service providers and employers must make reasonable adjustments for disabled people under the Equality Act 2010, and Welsh building regulations guidance expects entrances that are easy to open. An automatic door is a common way to meet both.

Next step

Automating an existing door in Bridgend

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.