UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automating an existing door · Wales

Automating an existing door in Gwent

Plenty of doors in Gwent are sound but heavy or awkward to open. Fitting an operator to the door you already have is often quicker and cheaper than replacing it. We survey for free and tell you plainly whether automation will work.

Area
Gwent
Nation
Wales
Towns listed
14
Guide price
From £1,795 ex VAT (£2,154 inc VAT)
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Coverage across Gwent

Automating an existing door across Gwent follows a simple pattern: you tell us about the door, we agree the price in writing, and a specialist engineer working under our management attends. Distance within the area does not change the process. Use the links below to reach the 14 towns we list, each with its own page, nearby places and guide prices.

Towns listed in Gwent: Newport, Cwmbran, Pontypool, Ebbw Vale, Caerphilly, Blackwood, Tredegar, Abergavenny, Bargoed, Chepstow, Risca, Abertillery, Monmouth, Caldicot.

What to think about for automating an existing door in Gwent

  • Think about how the door is locked. If it is locked by key every night, an electric lock or keep may be worth adding so the door can be secured without switching the operator off.
  • Doors facing the weather in exposed parts of Gwent are pushed about by wind. The survey checks whether a low-energy operator will cope or a stronger unit is needed.
  • Schools and community buildings in Gwent may prefer the work done in holidays or after hours. Ask for any out-of-hours working to be priced in the quote.
  • Find out whether the door is a fire door. If it is, the operator must suit fire doors and be wired so the door closes when the alarm sounds.
  • If the door is on an escape route, keep the existing panic or emergency hardware working. The operator should not stop the door opening by hand in an emergency.

Automating an existing door in Gwent: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT (£2,154 inc VAT).

ItemGuide priceNotes
Low-energy operator on an existing swing door£1,795 – £2,995installed, ex VAT; homes £2,154 – £3,594 inc VAT
Full-energy operator on an existing swing door, with safety sensors£2,495 – £3,995installed, ex VAT; homes £2,994 – £4,794 inc VAT
Operators on an existing pair of swing doors£3,795 – £6,495installed, ex VAT; homes £4,554 – £7,794 inc VAT
Automating an existing manual sliding door or screen£2,995 – £5,495installed, ex VAT; homes £3,594 – £6,594 inc VAT

Standards and rules in Wales

Under the Equality Act 2010, service providers and employers in Wales must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.

Wales has its own building regulations guidance. Approved Document M (Wales) uses a lower opening-force limit than England, 20 N at the leading edge, before a powered door is called for, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.

Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.

How it works

  1. Send photos and the address. A few pictures of the door from both sides, the address in Gwent and a note of who uses the entrance help us understand the job before anyone visits the site.
  2. No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
  3. Itemised quote to approve. We price every element of the work on automating an existing door separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
  4. Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.

Get a fixed price for automating a door in Gwent. The quote covers the operator, safety devices, controls and any work the door needs first.

Automating an existing door in Gwent: questions

Can you look after the door in Gwent once it is automated?

Yes. We can arrange servicing at intervals that suit how much the door is used, with the operator, safety devices and hinges checked and a written record left. Each visit has its price confirmed in writing before an engineer attends.

What will automating an existing door in Gwent cost?

Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. For homes that is from £2,154 including VAT. The free site survey in Gwent confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Can you automate the existing doors at our building in Gwent?

In most cases, yes. We check each door at a free survey, including the hinges, frame, glass, locks and power, and then quote a fixed price. If a door is not a good candidate, we explain why and what it would take to fix it, or quote a replacement instead.

Can you automate a fire door at our premises in Gwent?

Usually, using an operator designed for fire doors and wired to the fire alarm so the door closes when the alarm operates. We check the door's rating and condition first. A fire door that does not close and seal properly needs repairing before an operator goes on.

What do you need from us for parking and access in Gwent?

Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.

How do you make sure the door works for disabled visitors in Gwent?

We look at who uses the entrance: wheelchair users, people with walking aids, parents with buggies and older visitors. That shapes the opening width, the opening speed, the hold-open time and where push pads or sensors go. Service providers and employers have duties to make reasonable adjustments under equality and accessibility law, and an automatic door is a common one.

Do businesses in Gwent have to fit automatic doors?

There is no blanket requirement. Service providers and employers must make reasonable adjustments for disabled people under the Equality Act 2010, and Welsh building regulations guidance expects entrances that are easy to open. An automatic door is a common way to meet both.

Next step

Automating an existing door in Gwent

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.