UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automating an existing door · Cheshire

Automating an existing door in Crewe

Automating an existing door in Crewe, or anywhere in England, starts with a free survey. If both a retrofit and a new door would work, we price each so you can compare them on cost, lead time and disruption.

Town
Crewe
Area
Cheshire
Postcodes
CW1, CW2
Guide price
From £1,795 ex VAT (£2,154 inc VAT)
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Crewe and nearby

We cover the whole of the CW1 and CW2 postcode districts, along with nearby towns in Cheshire. You book each visit for automating an existing door directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.

Weather matters for entrances that face open car parks, which is common on retail and business parks around Crewe and elsewhere in Cheshire. Exposed doors can be pushed by wind and let heat escape, so draught lobbies, good seals and correctly set sensors are worth considering.

Nearby towns we also list for automating an existing door (straight-line distance): Nantwich (3.8 miles), Sandbach (4.6 miles), Winsford (7.3 miles), Kidsgrove (8.5 miles), Congleton (10.5 miles), Newcastle-under-Lyme (11.0 miles).

What to think about for automating an existing door in Crewe

  • Think about how the door is locked. If it is locked by key every night, an electric lock or keep may be worth adding so the door can be secured without switching the operator off.
  • Listed buildings and conservation areas in Crewe may need consent for an operator on an original door. Mounting it on the inside face usually keeps the street view the same.
  • Glass in a door that will be automated should be safety glass. Older doors in Crewe may have panes that need replacing before the work goes ahead.
  • Schools and community buildings in Crewe may prefer the work done in holidays or after hours. Ask for any out-of-hours working to be priced in the quote.
  • Check how the door hangs now. A door that drops, rubs on the floor or needs a shoulder to close will need its hinges or frame sorted before an operator goes on.

Automating an existing door in Crewe: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT (£2,154 inc VAT).

ItemGuide priceNotes
Low-energy operator on an existing swing door£1,795 – £2,995installed, ex VAT; homes £2,154 – £3,594 inc VAT
Full-energy operator on an existing swing door, with safety sensors£2,495 – £3,995installed, ex VAT; homes £2,994 – £4,794 inc VAT
Operators on an existing pair of swing doors£3,795 – £6,495installed, ex VAT; homes £4,554 – £7,794 inc VAT
Automating an existing manual sliding door or screen£2,995 – £5,495installed, ex VAT; homes £3,594 – £6,594 inc VAT

Standards and rules in England

Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.

Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.

How it works

  1. Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for automating an existing door and book a survey in Crewe.
  2. Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
  3. Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
  4. Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.

Send us a photo of the door and we will arrange a free survey in Crewe to confirm whether it can be automated, followed by a fixed quote.

Automating an existing door in Crewe: questions

Can you look after the door in Crewe once it is automated?

Yes. We can arrange servicing at intervals that suit how much the door is used, with the operator, safety devices and hinges checked and a written record left. Each visit has its price confirmed in writing before an engineer attends.

How are prices worked out for automating an existing door in Crewe?

Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. For homes that is from £2,154 including VAT. The free site survey in Crewe confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

What if our door in Crewe turns out to need replacing?

Then we will say so and explain why. If you want to go ahead, we can quote a new automatic door, or a new door ready for an operator. If both options are reasonable, we price each so you can choose, and the survey costs nothing either way.

Can you automate a front door at a house in Crewe?

Yes. Front doors at home are often automated for wheelchair users and people with limited grip, usually with an electric keep or lock so the door locks itself as it closes. Home prices are quoted including VAT, and the survey is free.

What do you need from us for parking and access in Crewe?

Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.

Can installation in Crewe happen outside opening hours?

Yes. Many shops, surgeries and offices prefer work early in the morning, in the evening or at weekends, when the entrance is quietest. Tell us your constraints when you enquire and they are built into the plan. Any extra cost for out-of-hours work is shown in the written quote rather than added afterwards.

Can a home in Crewe get help paying for a door opener?

Possibly. In England a Disabled Facilities Grant of up to £30,000 can fund adaptations that make it easier to get in and out of a home. It is means-tested and must be approved by the council before work starts, so ask your council and occupational therapist.

Next step

Automating an existing door in Crewe

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.