UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Access control for automatic doors · Cheshire

Access control for automatic doors in Crewe

Adding access control to an automatic door in Crewe is mostly a wiring and set-up job, but getting it wrong can leave a door locked when the alarm sounds. We follow your fire strategy and test the release every time.

Town
Crewe
Area
Cheshire
Postcodes
CW1, CW2
Guide price
From £795 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Crewe and nearby

We do not keep premises in Crewe. Instead, enquiries about access control for automatic doors come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the CW1 and CW2 postcode districts on a date that suits the site.

Weather matters for entrances that face open car parks, which is common on retail and business parks around Crewe and elsewhere in Cheshire. Exposed doors can be pushed by wind and let heat escape, so draught lobbies, good seals and correctly set sensors are worth considering.

Nearby towns we also list for access control for automatic doors (straight-line distance): Nantwich (3.8 miles), Sandbach (4.6 miles), Winsford (7.3 miles), Kidsgrove (8.5 miles), Congleton (10.5 miles), Newcastle-under-Lyme (11.0 miles).

What to think about for access control for automatic doors in Crewe

  • Schools in Crewe often want a remote release at the office and a schedule for drop-off and pick-up times. Agree how the door behaves in a lockdown with your safeguarding lead.
  • Healthcare sites in Crewe often control access to wards and staff areas. Think about how visitors, porters and emergency teams will get through at every hour.
  • Cable routes matter. Running cables between a reader, a controller and the operator through finished walls and ceilings can be a large share of the cost.
  • Think about lost cards and leavers. A system that lets you remove a card centrally is easier to run than a shared keypad code on a busy site.
  • Older automatic doors in Crewe may not have inputs for access control. The survey checks this, and an older operator may need upgrading or replacing before readers can be linked.

Access control for automatic doors in Crewe: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £795 ex VAT.

ItemGuide priceNotes
Card or fob reader tied into the door£795 – £2,495per door, ex VAT
Intercom or door entry tie-infrom £495priced on survey, ex VAT
Timed locking and night mode set-upincluded with the aboveprogrammed at commissioning
Electric lock added to an automatic dooron surveydepends on the door and the lock type

Standards and rules in England

Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.

Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.

How it works

  1. Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for access control for automatic doors and book a survey in Crewe.
  2. Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
  3. Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
  4. Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.

Want your automatic door in Crewe to open only for the right people? Start with a free site survey, with no obligation.

Access control for automatic doors in Crewe: questions

Can our door in Crewe run on a schedule?

Yes. The door can open freely during opening hours and switch to card or code entry with the lock engaged at night, at weekends and on holiday dates. Staff can override the schedule with a key switch if they need to.

What is the guide price for access control for automatic doors in Crewe?

Our guide starts from £795 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Crewe confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Our automatic door in Crewe is quite old. Can access control still be added?

Sometimes. Older operators may not have suitable inputs, or may not support an electric lock. The survey checks this, and if the operator needs upgrading first, the quote shows the cost of both, so you can decide. An older door may also benefit from a safety inspection at the same time.

Can you add access control to our automatic door in Crewe?

In most cases, yes. We check the operator's inputs, the lock options and the cable route at a free survey, then quote a fixed price. We can connect to your existing system or supply a standalone reader or keypad for the door.

What does the free site survey in Crewe involve?

An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for access control for automatic doors, with drawings where the door type needs them.

What power supply is needed for access control for automatic doors in Crewe?

Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.

Do businesses in Crewe have to fit automatic doors?

No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.

Next step

Access control for automatic doors in Crewe

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.