Coverage across Ayrshire
Wherever you are in Ayrshire, we need the same three things to get started on automating an existing door: a short description of the door, a few photos if you have them, and the address. From there we agree the price in writing and book a specialist engineer working under our management. Every town listed below has a page of its own, 11 in total.
Towns listed in Ayrshire: Kilmarnock, Ayr, Irvine, Kilwinning, Troon, Prestwick, Saltcoats, Largs, Ardrossan, Stevenston, Brodick.
What to think about for automating an existing door in Ayrshire
- Homes in Ayrshire with uPVC or composite doors can usually be automated, but the multipoint lock needs to work smoothly first. A stiff lock is best fixed before fitting.
- Schools and community buildings in Ayrshire may prefer the work done in holidays or after hours. Ask for any out-of-hours working to be priced in the quote.
- If the door is on an escape route, keep the existing panic or emergency hardware working. The operator should not stop the door opening by hand in an emergency.
- Listed buildings and conservation areas in Ayrshire may need consent for an operator on an original door. Mounting it on the inside face usually keeps the street view the same.
- Older buildings in Ayrshire often have heavy timber doors on floor springs. Some floor springs can be adapted, but many need replacing with hinges, which adds to the cost.
Automating an existing door in Ayrshire: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT (£2,154 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Low-energy operator on an existing swing door | £1,795 – £2,995 | installed, ex VAT; homes £2,154 – £3,594 inc VAT |
| Full-energy operator on an existing swing door, with safety sensors | £2,495 – £3,995 | installed, ex VAT; homes £2,994 – £4,794 inc VAT |
| Operators on an existing pair of swing doors | £3,795 – £6,495 | installed, ex VAT; homes £4,554 – £7,794 inc VAT |
| Automating an existing manual sliding door or screen | £2,995 – £5,495 | installed, ex VAT; homes £3,594 – £6,594 inc VAT |
Standards and rules in Scotland
Under the Equality Act 2010, service providers and employers in Scotland must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Scottish building standards guidance (the non-domestic Technical Handbook) expects an accessible entrance door to give a clear opening of at least 800 mm, says powered doors improve accessibility as long as they add no new hazard, and expects signage, sensors that hold the door open long enough, and guarding against collision or entrapment.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Ayrshire.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Keep the door you have and make it automatic. Book a free survey in Ayrshire and receive a written, itemised quote.
Automating an existing door in Ayrshire: questions
How long will our door in Ayrshire be out of use?
Usually half a day to a day per door. Where hinges, locks or glass are being changed as well, it can take longer. We plan the work so the building stays usable, and agree any out-of-hours working in the quote.
What is the guide price for automating an existing door in Ayrshire?
Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. For homes that is from £2,154 including VAT. The free site survey in Ayrshire confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you automate the existing doors at our building in Ayrshire?
In most cases, yes. We check each door at a free survey, including the hinges, frame, glass, locks and power, and then quote a fixed price. If a door is not a good candidate, we explain why and what it would take to fix it, or quote a replacement instead.
Can you automate a front door at a house in Ayrshire?
Yes. Front doors at home are often automated for wheelchair users and people with limited grip, usually with an electric keep or lock so the door locks itself as it closes. Home prices are quoted including VAT, and the survey is free.
What power supply is needed for automating an existing door in Ayrshire?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Can automatic doors be fitted to a listed building in Ayrshire?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Do businesses in Ayrshire have to fit automatic doors?
No law requires automatic doors everywhere. Under the Equality Act 2010 service providers and employers must make reasonable adjustments for disabled people, and Scottish guidance says powered doors improve accessibility at entrances. An automatic door is often the practical answer.