Covering Hedge End and nearby
Sites across the SO30 postcode district are visited by specialist automatic door engineers working under our management. They travel to Hedge End for curved automatic doors as bookings come in, so dates depend on the diary rather than a fixed local team, and we give you the earliest date we can offer when you book.
Parking on a busy high street can be tight. When work is booked in Hedge End, the engineer's arrival is planned around loading restrictions, any market days and opening hours, so the visit causes as little disruption as possible.
Nearby towns we also list for curved automatic doors (straight-line distance): Eastleigh (4.3 miles), Southampton (4.5 miles), Hythe (5.7 miles), Chandler's Ford (6.6 miles), Fareham (6.8 miles), Totton (8.3 miles).
What to think about for curved automatic doors in Hedge End
- A full-round door needs a roof or canopy that can be supported and drained. On exposed sites across Hampshire, think about how rainwater will leave the canopy without running down the glass into the threshold.
- Curved doors on landmark buildings in Hedge End are often lit at night. Plan canopy lighting, signage and any warm air curtain alongside the door, so cables and fixings are in place before the glass goes in.
- Consider a spare curved panel for busy entrances in Hedge End. It costs more at the start, but a broken leaf can then be replaced without waiting for new glass to be bent.
- If the entrance is on an escape route, the fire strategy decides how the door must behave when the alarm sounds or the power fails. Confirm this with your fire risk assessor before the design is fixed.
- The floor must be level across the whole arc, and the matwell and floor finish need cutting to the same radius as the guides. Coordinate the floor layer with the door programme so the curves match.
Curved automatic doors in Hedge End: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £14,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Half-round curved sliding entrance | from £14,995 | installed, ex VAT; priced on survey |
| Full-round curved entrance or large radius | Priced on survey | glass and track are made to the radius |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Curved doors are designed and priced after a free site survey, because the glass, track and screens are made to the radius of your entrance.
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Hedge End.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
To replace a tired entrance in Hedge End with a curved door, tell us the width, the depth available in front of the building and how busy it gets.
Curved automatic doors in Hedge End: questions
Who looks after a curved door in Hedge End once it is fitted?
You can arrange servicing with us, with each visit priced in writing beforehand. Curved doors need regular attention to the floor guides and carriages that follow the arc. A trained engineer should check the safety functions at least once a year, and busy hotel or store entrances are usually serviced more often.
What price range should I expect for curved automatic doors in Hedge End?
Our guide starts from £14,995 excluding VAT (per entrance), the same guide price we use across the UK. The free site survey in Hedge End confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
How long does a curved door project in Hedge End take?
Curved doors are typically 8 to 14 weeks from order once the drawings are approved, because the glass and frame are made to your radius. Installation then usually takes two to four days for a half-round door, and longer for a full-round door with a roof. The quote sets out the expected programme for your building.
Will we need planning permission for a curved entrance in Hedge End?
Possibly. A curved door that changes the look of the frontage or projects beyond the building line may need planning permission, and listed buildings may need listed building consent. Your local planning authority decides. We raise the question at survey and can supply drawings and product details for an application.
Do you service doors in Hedge End after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
What power supply is needed for curved automatic doors in Hedge End?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Which building regulations apply to a new automatic entrance in Hedge End?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.