UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Curved automatic doors · Hampshire

Curved automatic doors in Emsworth

Thinking of replacing a tired revolving or flat sliding entrance in Emsworth with a curved door? We look at the structure, the space outside and the traffic at a free survey, then explain the options and a realistic lead time.

Town
Emsworth
Area
Hampshire
Postcodes
PO10
Guide price
From £14,995 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Emsworth and nearby

For curved automatic doors, coverage around Emsworth is set by postcode and includes the PO10 postcode district, as well as nearby addresses in Hampshire. Specialist engineers working under our management attend each site, and the price is agreed in writing beforehand.

Many buildings in Emsworth are older, with timber frames, thick walls, steps or uneven thresholds. These affect where an operator and sensors can go, and the engineer checks them on site before anything is fitted or adjusted.

Nearby towns we also list for curved automatic doors (straight-line distance): Havant (2.2 miles), Waterlooville (4.7 miles), Chichester (6.9 miles), Portsmouth (7.5 miles), Gosport (9.1 miles), Fareham (10.6 miles).

What to think about for curved automatic doors in Emsworth

  • Curved entrances in Emsworth are often installed during a wider refurbishment. Working with the main contractor on dates, power and protection of the finished floor helps the door go in once, without return visits.
  • Department stores and shopping centres often have landlord fit-out rules for entrances. Ask centre management about approved working hours, hot works and fire alarm connections before the installation date is fixed.
  • The floor must be level across the whole arc, and the matwell and floor finish need cutting to the same radius as the guides. Coordinate the floor layer with the door programme so the curves match.
  • Listed buildings and conservation areas in Emsworth may need consent for a curved entrance. Drawings showing the radius, frame colour and canopy detail help the planning authority understand the proposal.
  • Curved glass cannot be cut to size on site. Allow for the longer lead time in any refurbishment programme, and do not book shopfitters or floor layers for the entrance until the door has a delivery date.

Curved automatic doors in Emsworth: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £14,995 ex VAT.

ItemGuide priceNotes
Half-round curved sliding entrancefrom £14,995installed, ex VAT; priced on survey
Full-round curved entrance or large radiusPriced on surveyglass and track are made to the radius
Battery backup for power-cut operation£395 – £695per door, ex VAT
Card or fob reader tied into the door£795 – £2,495per door, ex VAT

Curved doors are designed and priced after a free site survey, because the glass, track and screens are made to the radius of your entrance.

Standards and rules in England

In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.

How it works

  1. Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Emsworth.
  2. Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
  3. Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
  4. Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.

Talk to us about curved doors for your hotel, store or civic building in Emsworth. The survey is free and there is no obligation to proceed.

Curved automatic doors in Emsworth: questions

Do you install curved automatic doors in Emsworth?

Yes. We arrange half-round, full-round and segmental curved doors for buildings in Emsworth and across Hampshire. The survey, installation and commissioning are carried out by specialist automatic door engineers working under our management, and we remain the contracting party from the first drawing to handover.

How are prices worked out for curved automatic doors in Emsworth?

Our guide starts from £14,995 excluding VAT (per entrance), the same guide price we use across the UK. The free site survey in Emsworth confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Can a curved door in Emsworth replace a revolving door?

In many cases, yes. A full-round curved door gives similar draught protection with a straight, open path through, which many visitors find easier than a revolving door. The survey checks whether the existing drum position, floor recess and canopy can be reused or need altering.

Who looks after a curved door in Emsworth once it is fitted?

You can arrange servicing with us, with each visit priced in writing beforehand. Curved doors need regular attention to the floor guides and carriages that follow the arc. A trained engineer should check the safety functions at least once a year, and busy hotel or store entrances are usually serviced more often.

What do you need from us for parking and access in Emsworth?

Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.

What does the written quote for curved automatic doors in Emsworth include?

The quote lists each item separately: the door or equipment, installation, electrical connections where we provide them, removal of anything being replaced, testing and handover. It is a fixed price for the work described, so it does not change unless the scope changes, and any change is agreed with you in writing first.

Who is responsible for automatic doors on escape routes in Emsworth?

Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.

Next step

Curved automatic doors in Emsworth

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.