UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Curved automatic doors · Derbyshire

Curved automatic doors in Derby

We supply and install curved automatic doors for commercial buildings in Derby and elsewhere in England. Each project starts with a measured survey and approved drawings, and finishes with the door commissioned, tested and explained to the people who will run it.

Town
Derby
Area
Derbyshire
Postcodes
DE1, DE3, DE21, DE22, DE23, DE24
Guide price
From £14,995 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Derby and nearby

Coverage for curved automatic doors runs across the DE1, DE3, DE21, DE22, DE23 and DE24 postcode districts and out into the surrounding parts of Derbyshire. Wherever the building is, the arrangements stay the same: one contracting party, a written price before work, and a specialist engineer working under our management on site.

Universities, colleges and city hotels see sharp peaks of traffic at changeover times and check-in hours. For entrances like these in Derby, opening width, hold-open time and sensor range are set so the door copes with crowds without wasting heat.

Nearby towns we also list for curved automatic doors (straight-line distance): Belper (6.9 miles), Ilkeston (7.7 miles), Heanor (8.1 miles), Ripley (8.3 miles), Long Eaton (8.7 miles), Eastwood (9.1 miles).

What to think about for curved automatic doors in Derby

  • Listed buildings and conservation areas in Derby may need consent for a curved entrance. Drawings showing the radius, frame colour and canopy detail help the planning authority understand the proposal.
  • Hotel entrances in Derby see bursts of arrivals with luggage and coach parties. Choose a diameter and clear opening that let several people and cases pass together without waiting for a second cycle.
  • The floor must be level across the whole arc, and the matwell and floor finish need cutting to the same radius as the guides. Coordinate the floor layer with the door programme so the curves match.
  • Consider a spare curved panel for busy entrances in Derby. It costs more at the start, but a broken leaf can then be replaced without waiting for new glass to be bent.
  • If the entrance is on an escape route, the fire strategy decides how the door must behave when the alarm sounds or the power fails. Confirm this with your fire risk assessor before the design is fixed.

Curved automatic doors in Derby: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £14,995 ex VAT.

ItemGuide priceNotes
Half-round curved sliding entrancefrom £14,995installed, ex VAT; priced on survey
Full-round curved entrance or large radiusPriced on surveyglass and track are made to the radius
Battery backup for power-cut operation£395 – £695per door, ex VAT
Card or fob reader tied into the door£795 – £2,495per door, ex VAT

Curved doors are designed and priced after a free site survey, because the glass, track and screens are made to the radius of your entrance.

Standards and rules in England

In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.

How it works

  1. Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Derby.
  2. Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
  3. Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
  4. Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.

Planning a landmark entrance in Derby? Contact us early, so the survey, drawings and curved glass all fit your programme.

Curved automatic doors in Derby: questions

Is the site survey for a curved door in Derby free?

Yes. For a new curved entrance, the survey costs nothing and carries no obligation. The engineer measures the frontage, checks the structure, floor and power, and discusses the options with you. You then receive drawings and a fixed, itemised written quote.

What is the guide price for curved automatic doors in Derby?

Our guide starts from £14,995 excluding VAT (per entrance), the same guide price we use across the UK. The free site survey in Derby confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Can the curved door in Derby be installed while we stay open?

Often, yes, for a half-round replacement, with the opening secured overnight and the work planned around quieter hours. A full-round door with a new roof usually needs the entrance closed for longer, so a second entrance is helpful. We agree the arrangements with you before the date is fixed.

How long does a curved door project in Derby take?

Curved doors are typically 8 to 14 weeks from order once the drawings are approved, because the glass and frame are made to your radius. Installation then usually takes two to four days for a half-round door, and longer for a full-round door with a roof. The quote sets out the expected programme for your building.

How do you make sure the door works for disabled visitors in Derby?

We look at who uses the entrance: wheelchair users, people with walking aids, parents with buggies and older visitors. That shapes the opening width, the opening speed, the hold-open time and where push pads or sensors go. Service providers and employers have duties to make reasonable adjustments under equality and accessibility law, and an automatic door is a common one.

What does the written quote for curved automatic doors in Derby include?

The quote lists each item separately: the door or equipment, installation, electrical connections where we provide them, removal of anything being replaced, testing and handover. It is a fixed price for the work described, so it does not change unless the scope changes, and any change is agreed with you in writing first.

Do businesses in Derby have to fit automatic doors?

No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.

Next step

Curved automatic doors in Derby

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.