Covering Egham and nearby
We cover the whole of the TW20 postcode district, along with nearby towns in Surrey. You book each visit for safety and compliance upgrades directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.
Independent businesses in Egham often have one entrance and cannot close for long. Work is usually scheduled early, late or on a quiet day, and where a door must be out of use for a period, we plan to keep the entrance usable or secure.
Nearby towns we also list for safety and compliance upgrades (straight-line distance): Staines-upon-Thames (2.0 miles), Ashford (4.1 miles), Windsor (4.1 miles), Slough (5.7 miles), Weybridge (5.7 miles), Feltham (6.1 miles).
What to think about for safety and compliance upgrades in Egham
- If your building in Egham has one main entrance, battery backup lets the door open safely in a power cut, so there is always a way in and out.
- Schools and nurseries need particular attention to finger traps at hinges and beside screens, where small children's hands could easily be caught as the door moves.
- Doors serving care homes and hospitals in Egham may need wider safety zones and gentler closing speeds for residents and patients who move slowly or need help.
- Listed buildings and conservation areas in Egham may limit visible changes. Slim sensors and discreet guards keep the look of the historic entrance largely unchanged.
- Busy retail and public buildings in Egham may prefer upgrade work out of hours. Most single-door upgrades are completed in one visit, so disruption is limited.
Safety and compliance upgrades in Egham: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £195 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Side-screen protection or guarding | from £295 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Programme switch with key | £145 – £345 | fitted, ex VAT |
| Upgrade package for an older door | £795 – £2,495 | typical, after an inspection, ex VAT |
Standards and rules in England
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for safety and compliance upgrades and book a survey in Egham.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Keep an older door in safe use. Arrange a free survey in Egham and receive a quote that lists every upgrade on its own line.
Safety and compliance upgrades in Egham: questions
Do you carry out automatic door safety upgrades in Egham?
Yes. We quote and manage upgrade work in Egham, and the fitting is done by specialist automatic door engineers on our behalf. The survey is free, and each upgrade is priced separately on a fixed, itemised quote. After the work you receive a record of each change and its test results.
What do you charge for safety and compliance upgrades in Egham?
Our guide starts from £195 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Egham confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
How long do upgrades take at premises in Egham?
Most single-door upgrades take one visit of a few hours. Parts such as light curtains and battery units are typically 1 to 3 weeks to arrive after the quote is accepted. Larger packages are planned with you so the entrance stays usable wherever possible.
Is it cheaper to upgrade or replace our old door in Egham?
Upgrading is usually cheaper when the door and operator are sound. If the operator is old and several upgrades are needed, a new drive unit with new sensors may be better value overall. The survey compares the options, and the quote can show both so you can decide.
What is the lead time for safety and compliance upgrades in Egham?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
What happens once the installation in Egham is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Who is responsible for automatic doors on escape routes in Egham?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.