Covering Molesey and nearby
Homes, businesses and public buildings throughout the KT8 postcode district can arrange break-out escape route doors with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Molesey for the job rather than working from premises in town.
Independent businesses in Molesey often have one entrance and cannot close for long. Work is usually scheduled early, late or on a quiet day, and where a door must be out of use for a period, we plan to keep the entrance usable or secure.
Nearby towns we also list for break-out escape route doors (straight-line distance): Sunbury-on-Thames (1.7 miles), Walton-on-Thames (1.7 miles), Feltham (3.5 miles), Surbiton (3.6 miles), Twickenham (3.6 miles), Kingston upon Thames (3.7 miles).
What to think about for break-out escape route doors in Molesey
- Get hold of the fire strategy, or ask your fire risk assessor, before the survey. Knowing whether the door must slide open on alarm, break out, or both, saves a second visit and a revised quote.
- A break-out door needs a dedicated fused spur and, where the strategy relies on it opening without mains power, a battery unit. If there is no supply near the head of the door, an electrician will need to run one.
- Supermarkets and large stores in Molesey see trolleys, pallets and cleaning machines through the entrance. Those knocks can stiffen or loosen break-out fittings, so set service intervals with that traffic in mind.
- Shopping centre units in Molesey usually need landlord approval for a new entrance and for any fire alarm connection. Ask centre management for their fit-out rules early, as they often set working hours and contractor requirements.
- Listed buildings and conservation areas in Molesey may need consent before a new entrance goes in. Slim frames and the existing opening can often be kept, but check with the planning authority before ordering.
Break-out escape route doors in Molesey: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £7,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Break-out sliding door set for an escape route | from £7,995 | installed, ex VAT; typically up to £16,995 |
| Converting an existing sliding door to break-out | Priced on survey | depends on the frame, leaves and operator |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
Standards and rules in England
In England, fire safety law says sliding or revolving doors must not be used for exits specifically intended as emergency exits. Break-out sliding doors are used where an entrance also forms part of an escape route, as the fire strategy allows. Whether a break-out door is suitable is decided by the fire strategy for the building and the responsible person under the Regulatory Reform (Fire Safety) Order 2005.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Molesey.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
For a break-out escape route door in Molesey, start with a free survey. The fixed quote covers the entrance, alarm link, testing and handover records.
Break-out escape route doors in Molesey: questions
How long will our entrance in Molesey be out of use?
Usually one to three days on site, depending on the size of the opening and any building or electrical work. Where the entrance is the only way in, we plan the sequence so a temporary door or a partly open entrance can be kept, and agree any out-of-hours working in the quote.
What do you charge for break-out escape route doors in Molesey?
Our guide starts from £7,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Molesey confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you install break-out sliding doors in Molesey?
Yes. We arrange surveys and installations in Molesey through specialist automatic door engineers working under our management. We supply the complete entrance, set it up to the fire strategy you give us, test it in every mode and hand over the records. The survey is free and the quote is fixed.
Can you work with our fire risk assessor in Molesey?
Yes, and it usually helps. We can send your assessor the proposed specification, the break-out arrangement and how the door will behave on power loss and alarm, so they can confirm it matches the fire strategy before you order. Any changes they ask for are reflected in a revised quote.
What happens once the installation in Molesey is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
How much disruption should we expect while the work is done in Molesey?
Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.
Do businesses in Molesey have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.