Covering Oxford and nearby
Coverage for automatic swing doors runs across the OX1, OX2, OX3 and OX4 postcode districts and out into the surrounding parts of Oxfordshire. Wherever the building is, the arrangements stay the same: one contracting party, a written price before work, and a specialist engineer working under our management on site.
Tall buildings can create strong wind at ground level, and wind pressure is a common cause of sliding doors stalling or reversing. Lobbies, telescopic leaves and correctly set closing force all help, and the engineer looks at exposure before recommending changes.
Nearby towns we also list for automatic swing doors (straight-line distance): Abingdon (5.7 miles), Didcot (9.9 miles), Witney (10.0 miles), Bicester (11.1 miles), Aylesbury (19.4 miles), Banbury (21.8 miles).
What to think about for automatic swing doors in Oxford
- Check the hinges first. Older doors in Oxford often have worn hinges that would fail under an operator, so the survey may recommend heavier hinges or pivots.
- Electric locks must be coordinated with the operator, so the lock releases before the arm moves. Tell us about existing locks, card readers and intercoms at the survey.
- Hospital and care home corridors in Oxford need doors that open early enough for beds and trolleys. Radar sensors set to the right range, or a push pad placed before the door, keep traffic moving.
- Power comes from a fused spur near the head of the door. In older buildings in Oxford with solid walls, allow time for surface trunking or chasing to reach the operator.
- External swing doors facing the wind need stronger operators and careful set-up. On exposed sites across Oxfordshire, consider whether a canopy or a sliding door would work better.
Automatic swing doors in Oxford: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £2,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Full-energy operator on an existing single door, with safety sensors | £2,495 – £3,995 | installed, ex VAT |
| Operators on an existing pair of doors | £3,795 – £6,495 | installed, ex VAT |
| New single automatic swing door set (door, frame and operator) | £3,495 – £6,495 | installed, ex VAT |
| New double automatic swing door set | £7,995 – £9,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Oxford and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on automatic swing doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Use the guide price tool for a quick figure, then let us survey the doors in Oxford and fix the price in writing.
Automatic swing doors in Oxford: questions
Will the swing operator in Oxford work with our fire alarm?
It can. Fire doors that are held open must close automatically when the fire alarm operates, and the operator can be linked to the alarm to do this. Other doors can be set to open on alarm where the fire strategy needs it. Your alarm engineer usually makes the panel connection.
Can you give me a price for automatic swing doors in Oxford?
Our guide starts from £2,495 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Oxford confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
How quickly can a swing operator be fitted in Oxford?
Operators for existing doors are typically 2 to 4 weeks from order. On site, a single door usually takes half a day to a day, and a pair about a day. We can plan work for evenings, weekends or holidays where the building is busy, with any extra cost shown in the quote.
Can our existing doors in Oxford be automated?
Usually, if the doors, hinges and frames are in good condition. The survey checks the door weight, the hinges, what the operator will fix to and what sits in the swing path. Where a door is too worn, we will say so and quote a new doorset with the operator fitted instead.
Will the building stay secure while the entrance is being changed?
We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Oxford is agreed before work starts.
Can automatic doors be fitted to a listed building in Oxford?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Who is responsible for automatic doors on escape routes in Oxford?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.