Covering Oxford and nearby
We cover the whole of the OX1, OX2, OX3 and OX4 postcode districts, along with nearby towns in Oxfordshire. You book each visit for automatic entrance lobbies directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.
Access in a city centre needs planning. Loading bays, permit parking, pedestrianised streets and delivery windows all affect when an engineer can unload, so a visit to Oxford is booked around them and any restrictions are noted in advance.
Nearby towns we also list for automatic entrance lobbies (straight-line distance): Abingdon (5.7 miles), Didcot (9.9 miles), Witney (10.0 miles), Bicester (11.1 miles), Aylesbury (19.4 miles), Banbury (21.8 miles).
What to think about for automatic entrance lobbies in Oxford
- Where an over-door heater is fitted, check its settings once the lobby is working. Many buildings find the heater can run at a lower setting afterwards.
- Entrances in Oxford that face the prevailing wind lose the most heat and take the most rain. A deeper lobby, or a right-angle layout that turns the inner doors away from the wind, makes the biggest difference there.
- If the lobby is on an escape route, the fire strategy decides what both door sets do on alarm. Sequencing and interlocks must release so nothing stops people leaving.
- Office buildings on business parks in Oxford often have a reception desk close to the entrance. Keeping the desk out of line with the doors, and making the lobby deep enough, keeps the receptionist out of the draught.
- Plan for a recessed matting well across the lobby floor. Wet shoes on a hard floor are a slip risk, and loose mats can trip people or upset floor-level sensors.
Automatic entrance lobbies in Oxford: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £14,995 to £34,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Draught lobby: two sets of automatic sliding doors and glazed screens | £14,995 – £34,995 | doors and screens, installed, ex VAT |
| Lobby with curtain walling or building work | Priced on survey | larger public-sector lobbies have cost £50,000 or more |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Lobby prices cover the doors and glazed screens. Building work, flooring, heating and curtain walling are priced on survey.
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for automatic entrance lobbies and book a survey in Oxford.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Planning a refit or a new entrance in Oxford? Get in touch early and we will quote the lobby as one package with the rest of the entrance.
Automatic entrance lobbies in Oxford: questions
Is a revolving door a better option than a lobby in Oxford?
It can be where space is tight and traffic is steady, because a revolving door seals the entrance at every turn. A revolving door is not accessible on its own, though, so an accessible powered sliding or swing door is needed alongside it. We can price both at survey.
What do you charge for automatic entrance lobbies in Oxford?
Our guide is £14,995 to £34,995 excluding VAT (per lobby, doors and screens), the same guide prices we use across the UK. The free site survey in Oxford confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Will our entrance in Oxford have to close while the lobby is built?
Not for the whole job in most cases. We plan the order of work so one set of doors, or a temporary door, keeps the entrance usable, and agree any out-of-hours working in the quote. A short closure may be needed when the final set is commissioned.
Do you design lobbies for new buildings in Oxford?
Yes. We can work from the architect's drawings, suggest door types and depth, and quote the doors, screens and controls as one package for the main contractor or the client. Designing the lobby in at the start is usually simpler and cheaper than adding it later.
How do you make sure the door works for disabled visitors in Oxford?
We look at who uses the entrance: wheelchair users, people with walking aids, parents with buggies and older visitors. That shapes the opening width, the opening speed, the hold-open time and where push pads or sensors go. Service providers and employers have duties to make reasonable adjustments under equality and accessibility law, and an automatic door is a common one.
What is the lead time for automatic entrance lobbies in Oxford?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
Which building regulations apply to a new automatic entrance in Oxford?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.