Coverage across the East Riding of Yorkshire
There is no branch to visit in the East Riding of Yorkshire; instead, specialist engineers working under our management travel to you. That keeps automatic sliding doors available across the whole area, including smaller towns and rural addresses. The page for each of the 5 towns we list below sets out nearby places, guide prices and the questions people usually ask.
Towns listed in the East Riding of Yorkshire: Hull, Bridlington, Beverley, Goole, Cottingham.
What to think about for automatic sliding doors in the East Riding of Yorkshire
- Where a building in the East Riding of Yorkshire is listed or sits in a conservation area, a new entrance may need consent first. Slim frames, a colour matched to the existing shopfront and careful drawings can all help an application.
- Older shopfronts in the East Riding of Yorkshire often have a timber or steel frame that was never designed to carry a sliding door header. The survey checks what sits above the opening and whether new support is needed before anything is ordered.
- Power is needed near the head of the door, usually from a fused spur. If there is no supply nearby, allow for an electrician to run one before the fitting day so the door can be commissioned straight away.
- Care settings in the East Riding of Yorkshire sometimes need a sliding entrance that visitors can use freely while some residents cannot leave unaccompanied. Keypads and programme modes can be set to follow the home's own care policies.
- Wind blowing straight at an entrance can make sliding leaves drag or cause the door to open when nobody is there. On exposed frontages across the East Riding of Yorkshire, a partial opening mode or a draught lobby is worth considering.
Automatic sliding doors in the East Riding of Yorkshire: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £4,495 to £12,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Single-slide door set, about 1.0 to 1.2 m clear opening | £4,495 – £7,995 | framed aluminium and glass, installed, ex VAT |
| Bi-parting door set, about 2 m clear opening, with side screens | £6,995 – £12,995 | installed, ex VAT |
| Large, full-height or heavy-duty entrances | from £14,995 | Priced on survey |
| Break-out leaves and screens for an escape route | £995 – £3,995 | added to a sliding door, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in the East Riding of Yorkshire and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on automatic sliding doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Book a survey in the East Riding of Yorkshire and an engineer will measure the opening, check the power and floor, and talk you through the sliding layouts that fit.
Automatic sliding doors in the East Riding of Yorkshire: questions
What happens after the sliding door in the East Riding of Yorkshire is fitted?
You get a handover pack with the test record, risk assessment and user instructions, and staff are shown the programme switch. From then on the door needs daily checks and planned servicing. We can quote a service arrangement at intervals based on how much the door is used and the risk.
How much should I budget for automatic sliding doors in the East Riding of Yorkshire?
Our guide is £4,495 to £12,995 excluding VAT (per door set), the same guide prices we use across the UK. The free site survey in the East Riding of Yorkshire confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can the old door in the East Riding of Yorkshire be removed and taken away?
Yes. Removal of the existing door and frame is listed as a line in the quote, along with making good around the opening. Glass and aluminium are taken away for recycling where possible. If the old door belongs to a landlord, tell us at survey so its removal can be agreed with them before the work is booked.
Do we need consent for a new entrance in the East Riding of Yorkshire?
It depends on the building. A change to how a shopfront looks may need planning permission, and listed buildings may need listed building consent. Your local planning authority decides. We flag the question at survey and can provide drawings and product details to support an application if one is needed.
How are payments structured for work in the East Riding of Yorkshire?
Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.
How do you make sure the door works for disabled visitors in the East Riding of Yorkshire?
We look at who uses the entrance: wheelchair users, people with walking aids, parents with buggies and older visitors. That shapes the opening width, the opening speed, the hold-open time and where push pads or sensors go. Service providers and employers have duties to make reasonable adjustments under equality and accessibility law, and an automatic door is a common one.
Who is responsible for automatic doors on escape routes in the East Riding of Yorkshire?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.