Coverage across Perth and Kinross
Automatic folding doors across Perth and Kinross follows a simple pattern: you tell us about the door, we agree the price in writing, and a specialist engineer working under our management attends. Distance within the area does not change the process. Use the links below to reach the 3 towns we list, each with its own page, nearby places and guide prices.
Towns listed in Perth and Kinross: Perth, Blairgowrie, Crieff.
What to think about for automatic folding doors in Perth and Kinross
- Busy food and drink outlets in Perth and Kinross may want the door to stay folded open in summer and run automatically in winter. Hold-open and automatic modes on the programme switch make that easy.
- Folding doors have more hinges than sliding doors. Planned servicing at intervals based on how busy the door is keeps hinges, pivots and finger guards in good order.
- Fold direction matters. Folding inwards keeps the pavement clear but takes a little space inside the shop; folding outwards suits internal doors where room inside is tight.
- Terraced shopfronts across Perth and Kinross sometimes have timber frames and fascias that need strengthening to carry a header. The survey checks what the operator can be fixed to.
- Check what sits beside the doorway. Displays, A-boards, bins and queues in the area where the leaves fold can stop the door or set off its sensors, so plan a clear zone.
Automatic folding doors in Perth and Kinross: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £5,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Automatic folding door, up to about 2 m clear opening | £5,995 – £10,995 | installed, ex VAT |
| Folding door with break-out for an escape route | top of range or on survey | depends on the fire strategy |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in Scotland
Scottish building standards guidance (the non-domestic Technical Handbook) expects an accessible entrance door to give a clear opening of at least 800 mm, says powered doors improve accessibility as long as they add no new hazard, and expects signage, sensors that hold the door open long enough, and guarding against collision or entrapment.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Under the Equality Act 2010, service providers and employers in Scotland must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Most building work in Scotland needs a building warrant before it starts, so new entrances are checked with the local authority verifier first.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Perth and Kinross and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on automatic folding doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Send us a photo of your frontage in Perth and Kinross and its width, and we will arrange a free survey for an automatic folding door.
Automatic folding doors in Perth and Kinross: questions
What happens after the folding door in Perth and Kinross is installed?
You receive the test record, a site-specific risk assessment and user instructions, and staff are shown the programme switch and how to fold the door by hand. Planned servicing can then be arranged, with each visit priced in writing before an engineer attends.
How much should I budget for automatic folding doors in Perth and Kinross?
Our guide starts from £5,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Perth and Kinross confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can a folding door in Perth and Kinross open with a push button instead of a sensor?
Yes. Many shops use a radar sensor so the door opens as customers approach, but push pads, wave-to-open switches or a key switch can be used instead or as well. Internal doors often use push buttons, so the door only opens when someone needs it.
Do we need permission to change the shop door in Perth and Kinross?
It depends on the building. Changing how a shopfront looks may need planning permission, and listed buildings may need listed building consent. Your local planning authority decides. If you rent the unit, the landlord will usually need to approve the work too. We flag both at the survey.
Do I need permission from a landlord or the council before work in Perth and Kinross?
It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.
Can automatic doors be fitted to a listed building in Perth and Kinross?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Who is responsible for automatic doors on escape routes in Perth and Kinross?
The person responsible for fire safety under the Fire (Scotland) Act 2005 for those premises. Scottish guidance allows automatic doors on escape routes only where they fail safely to outward opening or have a monitored fail-safe system that opens them on power failure, sensor failure and fire alarm.