Covering Nailsea and nearby
We cover the whole of the BS48 postcode district, along with nearby towns in Somerset. You book each visit for automatic door repairs directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.
Many buildings in Nailsea are older, with timber frames, thick walls, steps or uneven thresholds. These affect where an operator and sensors can go, and the engineer checks them on site before anything is fitted or adjusted.
Nearby towns we also list for automatic door repairs (straight-line distance): Portishead (3.5 miles), Clevedon (4.3 miles), Clifton (6.3 miles), Bedminster (6.7 miles), Bristol (7.1 miles), Caldicot (10.7 miles).
What to think about for automatic door repairs in Nailsea
- A door with battery backup may show a fault, or fail to open in a power cut, when its battery is worn out. Batteries are a routine replacement part rather than a major repair.
- Rule out the simple things. Check whether the door's isolator or fused spur has been switched off, and whether other equipment on the same circuit has also stopped working.
- Leisure centres, schools and public buildings in Nailsea may need a contractor induction or permit before work starts. Send any site rules with your booking so the visit can go ahead first time.
- Glass damage needs prompt action to keep people safe. Switch the door off, keep people back from the broken leaf and tape or board the glass if that can be done safely.
- Doors knocked by trolleys, pushchairs or deliveries often go out of line. Repeated impacts damage rollers and floor guides, so it helps to know roughly when the fault first appeared.
Automatic door repairs in Nailsea: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: from £95 ex VAT (£114 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Repair visit including the first hour, standard hours | £95 – £195 | ex VAT; homes £114 – £234 inc VAT |
| Repair visit, evenings and weekends | £195 – £300 | ex VAT; homes £234 – £360 inc VAT |
| Additional labour | £65 – £95 | per hour, ex VAT; homes £78 – £114 inc VAT |
| Sensor replacement | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
| Drive belt replacement | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Rollers, carriage wheels or floor guides | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
| Door off track or realignment | £125 – £345 | ex VAT; homes £150 – £414 inc VAT |
| Controller (control board) replacement | £395 – £895 | fitted, ex VAT; homes £474 – £1,074 inc VAT |
| Motor or gearbox replacement | £695 – £1,395 | fitted, ex VAT; homes £834 – £1,674 inc VAT |
The visit price is agreed in writing before an engineer attends. Parts and further work are quoted before they are done. Prices for faulty parts depend on the make and model of the door.
Standards and rules in England
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.
No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.
How it works
- Share the details. Send the address in Nailsea, the door type and make if you know it, and a description or video of the problem. For servicing, tell us how many doors there are and how busy each one is.
- Price confirmed in writing. We agree the visit price in writing before an engineer attends. Some straightforward repairs can be priced in full from photos and the make and model of the door.
- Diagnosis and repair. A specialist engineer attends on the agreed date, finds the cause, repairs or services the door, and tests its operation, sensors and safety functions with reference to BS EN 16005.
- Written record. Each visit ends with a written record for your files. Anything still outstanding, such as parts on order or recommended upgrades, is quoted before any further work is done.
Get your entrance working again. Describe the fault at your premises in Nailsea and we will tell you what the visit costs and when an engineer can attend.
Automatic door repairs in Nailsea: questions
Is it safe to keep using a faulty automatic door in Nailsea?
It depends on the fault. A slow or noisy door may be safe to use until the visit, but a door that strikes people, closes unexpectedly or has damaged glass should be switched off and kept clear. If you are unsure, switch it off and use another entrance until an engineer has checked it.
What is the guide price for automatic door repairs in Nailsea?
Our guide starts from £95 excluding VAT (visit including the first hour), the same guide price we use across the UK. For homes that is from £114 including VAT. We agree the visit price in writing before an engineer attends in Nailsea, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Can you tell me the cost before visiting my premises in Nailsea?
We always confirm the visit price before attending. For some faults, photos of the door and the operator label let us price the repair itself in advance. Where the cause needs testing on site, parts and extra work are quoted after diagnosis and only go ahead if you agree.
How soon can an engineer get to my door in Nailsea?
That depends on engineer availability around Nailsea when you contact us, so we do not promise a time. Tell us whether the door is stuck open, stuck shut or unsafe, and we will tell you the earliest visit we can offer. Meanwhile, set the door to a safe mode and keep people away from the leaves.
How is the visit price set for work in Nailsea?
We agree the visit price with you in writing before an engineer attends. It is based on the type of door, the work requested and the location. If parts or further work are needed once the engineer has found the cause, those are quoted before they are done, so the cost never moves without your agreement.
Which makes of automatic door can you work on in Nailsea?
Engineers working under our management work on most makes of automatic door, including sliding, swing, folding, telescopic and revolving types. Some older or obsolete operators have limited parts availability. If that applies, we explain the options, which may include a replacement drive unit on the existing frame, and quote them before anything is ordered.
Which building regulations apply to a new automatic entrance in Nailsea?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.