Covering Sevenoaks and nearby
For automatic door repairs, coverage around Sevenoaks is set by postcode and includes the TN13 and TN14 postcode districts, as well as nearby addresses in Kent. Specialist engineers working under our management attend each site, and the price is agreed in writing beforehand.
In Sevenoaks, automatic door needs often centre on the high street: independent shops, pharmacies, banks, cafés and estate agents. Frontages are often narrow, so the choice is usually between a compact sliding door, a folding door or a swing operator on the existing door.
Nearby towns we also list for automatic door repairs (straight-line distance): Tonbridge (6.5 miles), Orpington (8.1 miles), Swanley (8.6 miles), Tunbridge Wells (10.2 miles), Sidcup (11.2 miles), Caterham (11.6 miles).
What to think about for automatic door repairs in Sevenoaks
- Glass damage needs prompt action to keep people safe. Switch the door off, keep people back from the broken leaf and tape or board the glass if that can be done safely.
- Opening hours matter when booking a repair in Sevenoaks. If your premises close early or open late, mention it so the engineer can work while the entrance is quiet.
- Older shopfronts in Sevenoaks may have automatic doors with discontinued drive units. Ask whether parts are still available before agreeing to a large repair, as a new operator may be better value.
- Doors knocked by trolleys, pushchairs or deliveries often go out of line. Repeated impacts damage rollers and floor guides, so it helps to know roughly when the fault first appeared.
- Busy high street shops in Sevenoaks lose trade quickly when the entrance fails. Keep the programme switch key where staff can find it, so the door can be set to a safe mode while you wait.
Automatic door repairs in Sevenoaks: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: from £95 ex VAT (£114 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Repair visit including the first hour, standard hours | £95 – £195 | ex VAT; homes £114 – £234 inc VAT |
| Repair visit, evenings and weekends | £195 – £300 | ex VAT; homes £234 – £360 inc VAT |
| Additional labour | £65 – £95 | per hour, ex VAT; homes £78 – £114 inc VAT |
| Sensor replacement | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
| Drive belt replacement | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Rollers, carriage wheels or floor guides | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
| Door off track or realignment | £125 – £345 | ex VAT; homes £150 – £414 inc VAT |
| Controller (control board) replacement | £395 – £895 | fitted, ex VAT; homes £474 – £1,074 inc VAT |
| Motor or gearbox replacement | £695 – £1,395 | fitted, ex VAT; homes £834 – £1,674 inc VAT |
The visit price is agreed in writing before an engineer attends. Parts and further work are quoted before they are done. Prices for faulty parts depend on the make and model of the door.
Standards and rules in England
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.
No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.
How it works
- Tell us what is happening. Describe the fault, or the service or inspection that is due, and send photos of the door and any label on the operator. Include the address in Sevenoaks and how much the site depends on the door.
- Visit price agreed in writing. We confirm the price of the visit in writing before an engineer attends. If the door can be priced from photos and its make and model, we say so at this stage.
- Engineer visit. A specialist engineer working under our management diagnoses the fault or carries out the service, then tests the operation of the door and its safety sensors before leaving the site.
- Findings and follow-up. You receive a written record of what was found and done. Any parts or further work needed are quoted in writing before they go ahead, and nothing is added without your agreement.
Send us a photo of the faulty door and its operator label in Sevenoaks. We will confirm the visit price in writing and offer the earliest engineer visit available.
Automatic door repairs in Sevenoaks: questions
Is it safe to keep using a faulty automatic door in Sevenoaks?
It depends on the fault. A slow or noisy door may be safe to use until the visit, but a door that strikes people, closes unexpectedly or has damaged glass should be switched off and kept clear. If you are unsure, switch it off and use another entrance until an engineer has checked it.
How much should I budget for automatic door repairs in Sevenoaks?
Our guide starts from £95 excluding VAT (visit including the first hour), the same guide price we use across the UK. For homes that is from £114 including VAT. We agree the visit price in writing before an engineer attends in Sevenoaks, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Can you repair revolving doors in Sevenoaks?
Yes. The engineers we send work on automatic and manual revolving doors as well as sliding and swing doors. Revolving doors have extra safety devices, such as stop buttons and edge sensors, which are all tested after a repair. Parts for some revolving doors take longer to source, so photos of the drive and control panel help us prepare.
Do engineers carry spare parts for doors in Sevenoaks?
Engineers carry common parts such as sensors, belts and some rollers. Controllers, motors and parts for less common doors are ordered once the fault is confirmed, and delivery is typically 1 to 3 weeks. Knowing the make and model in advance improves the chance of a repair during the first visit.
Do you leave a written record after each visit in Sevenoaks?
Yes. Every visit ends with a written record of what was checked, what was done and anything that still needs attention. For safety inspections you receive a report of the findings and a site-specific risk assessment. Keeping these on file is the usual way to show that a workplace door is maintained and in good working order.
What if a door in Sevenoaks is found to be unsafe?
The engineer explains the problem and, where needed, leaves the door in a safe state, for example switched off or set so it cannot trap or strike anyone. You receive a written note of the issue. The repair or upgrade that would put it right is quoted before any further work is carried out.
Which building regulations apply to a new automatic entrance in Sevenoaks?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.