Covering Dalgety Bay and nearby
From shops and surgeries to schools, care homes and private houses, any building in the KY11 postcode district can be covered for automatic door repairs. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Care homes in and around Dalgety Bay often need automatic doors on corridors and day rooms as well as at the main entrance. Gentle operation, hold-open devices linked to the fire alarm and controlled exits help residents move about safely.
Nearby towns we also list for automatic door repairs (straight-line distance): Rosyth (3.4 miles), South Queensferry (3.6 miles), Dunfermline (4.9 miles), Cowdenbeath (5.3 miles), Edinburgh (8.3 miles), Broxburn (8.4 miles).
What to think about for automatic door repairs in Dalgety Bay
- Older shopfronts in Dalgety Bay may have automatic doors with discontinued drive units. Ask whether parts are still available before agreeing to a large repair, as a new operator may be better value.
- For surgeries, clinics and care settings in Dalgety Bay, a door that will not open can stop wheelchair users getting in. Plan an alternative accessible entrance and clear signs while the repair is arranged.
- Grit and stones in the floor guide are a frequent cause of doors sticking or stopping short. Sweeping the threshold and track area regularly prevents many breakdowns.
- Wet and windy weather causes many false openings. Sensors over exposed entrances can react to rain and blowing leaves, and a small change to the detection zone often cures it.
- A door with battery backup may show a fault, or fail to open in a power cut, when its battery is worn out. Batteries are a routine replacement part rather than a major repair.
Automatic door repairs in Dalgety Bay: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: from £95 ex VAT (£114 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Repair visit including the first hour, standard hours | £95 – £195 | ex VAT; homes £114 – £234 inc VAT |
| Repair visit, evenings and weekends | £195 – £300 | ex VAT; homes £234 – £360 inc VAT |
| Additional labour | £65 – £95 | per hour, ex VAT; homes £78 – £114 inc VAT |
| Sensor replacement | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
| Drive belt replacement | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Rollers, carriage wheels or floor guides | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
| Door off track or realignment | £125 – £345 | ex VAT; homes £150 – £414 inc VAT |
| Controller (control board) replacement | £395 – £895 | fitted, ex VAT; homes £474 – £1,074 inc VAT |
| Motor or gearbox replacement | £695 – £1,395 | fitted, ex VAT; homes £834 – £1,674 inc VAT |
The visit price is agreed in writing before an engineer attends. Parts and further work are quoted before they are done. Prices for faulty parts depend on the make and model of the door.
Standards and rules in Scotland
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.
No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.
How it works
- Explain the problem. Whether the door is stuck, slow, noisy or due its next check, a short description and a few photos tell us which kind of visit to book for automatic door repairs and what to bring.
- Visit cost agreed. You get the visit price in writing before we book the engineer. There are no hidden extras: parts and further work are always quoted separately and in advance.
- Engineer on site. The engineer inspects the operator, sensors, tracks and leaves, carries out the repair or service, and runs the door through its safety tests before it goes back into use.
- Follow-up quoted. You are sent a record of the visit. If something else needs attention, we quote it in writing; for doors on a service plan, the next visit date is noted on the record.
For a written repair price in Dalgety Bay, tell us the make of the door, what it is doing and whether it is stuck open, stuck shut or unsafe.
Automatic door repairs in Dalgety Bay: questions
Can you repair revolving doors in Dalgety Bay?
Yes. The engineers we send work on automatic and manual revolving doors as well as sliding and swing doors. Revolving doors have extra safety devices, such as stop buttons and edge sensors, which are all tested after a repair. Parts for some revolving doors take longer to source, so photos of the drive and control panel help us prepare.
What do you charge for automatic door repairs in Dalgety Bay?
Our guide starts from £95 excluding VAT (visit including the first hour), the same guide price we use across the UK. For homes that is from £114 including VAT. We agree the visit price in writing before an engineer attends in Dalgety Bay, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Do you repair automatic doors in Dalgety Bay?
Yes. We take the booking, agree the price and manage the job, and the visit in Dalgety Bay is made by a specialist automatic door engineer working under our management. The engineers we send work on sliding, swing, folding and revolving doors from most makers, including doors we did not install. The visit price is confirmed with you in writing before the engineer is booked.
What if my door in Dalgety Bay cannot be repaired?
If a drive unit is obsolete, or a repair would cost close to a new operator, the engineer explains why. A new drive unit can usually be fitted to the existing frame and leaves, which costs far less than a whole new door. You receive a written quote for that, and whether to go ahead is entirely your choice.
Which makes of automatic door can you work on in Dalgety Bay?
Engineers working under our management work on most makes of automatic door, including sliding, swing, folding, telescopic and revolving types. Some older or obsolete operators have limited parts availability. If that applies, we explain the options, which may include a replacement drive unit on the existing frame, and quote them before anything is ordered.
Can you take over servicing of doors in Dalgety Bay from another company?
Yes. Send us the door details and, if you have them, previous service records or inspection reports. The first visit gives a baseline for each door, and its price is agreed in writing beforehand. From then on, records continue in one consistent format, whichever company looked after the doors before.
Is a building warrant needed for a new automatic entrance in Dalgety Bay?
Often, yes. Most building work in Scotland needs a building warrant before it starts, and the non-domestic Technical Handbook sets out what an accessible entrance should provide, including a clear opening of at least 800 mm. We tell you at the survey if your job is likely to need one.