UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automatic door refurbishment · Hampshire

Automatic door refurbishment in Hedge End

Refurbishing an entrance in Hedge End costs a fraction of a new door when the frame is sound. If the frame or glass is past saving, the survey will say so, and a new door can be priced alongside for comparison.

Town
Hedge End
Area
Hampshire
Postcodes
SO30
Guide price
From £395 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Hedge End and nearby

Homes, businesses and public buildings throughout the SO30 postcode district can arrange automatic door refurbishment with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Hedge End for the job rather than working from premises in town.

Libraries, health centres and council buildings in Hedge End still need accessible entrances, whatever their size. A single automatic door with a push pad or touch-free switch is often enough to give everyone easy access.

Nearby towns we also list for automatic door refurbishment (straight-line distance): Eastleigh (4.3 miles), Southampton (4.5 miles), Hythe (5.7 miles), Chandler's Ford (6.6 miles), Fareham (6.8 miles), Totton (8.3 miles).

What to think about for automatic door refurbishment in Hedge End

  • Busy retail units in Hedge End may prefer the work done in stages, one leaf at a time, so the entrance stays open throughout trading hours.
  • Care settings in Hedge End benefit from level thresholds and smooth-running leaves that do not snag walking frames, trolleys or wheelchair footplates as people pass through.
  • If the operator is close to the end of its life, refurbishing the running gear while fitting a new drive unit saves a second visit and a second set-up.
  • Office blocks and business parks in Hedge End with several matching doors can refurbish them together for a consistent finish and a lower cost per door.
  • Frames near the coast or busy roads can corrode faster. The survey checks fixings and the bottom of the frame, where water and grit tend to collect.

Automatic door refurbishment in Hedge End: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £395 ex VAT.

ItemGuide priceNotes
Running gear refresh: rollers, guides, brushes and seals£395 – £895per door, ex VAT
Track overhaul£395 – £895per door, ex VAT
Replacement glass leaffrom £495each, ex VAT; size and glass type on survey
Full refurbishment of a sliding door£1,495 – £2,995running gear, seals, guides and one leaf, ex VAT

Standards and rules in England

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.

How it works

  1. Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Hedge End.
  2. Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
  3. Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
  4. Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.

Send us photos of the door that needs attention in Hedge End, and we will arrange a survey at no cost and an itemised quote for the work.

Automatic door refurbishment in Hedge End: questions

Do you set up the door again after refurbishing it in Hedge End?

Yes. New running parts change how the leaves move, so speeds, sensor zones and obstacle detection are checked and reset before handover. You receive a record of the parts fitted and the test results to keep with the door's service history.

What price range should I expect for automatic door refurbishment in Hedge End?

Our guide starts from £395 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Hedge End confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Can refurbishment in Hedge End help with draughts and heating costs?

New seals and brush strips, and leaves that close fully, reduce draughts through a closed door. For very exposed entrances, a second set of doors forming a draught lobby may also be worth considering, and we can price both so you can compare the likely benefit.

Do you refurbish automatic doors in Hedge End?

Yes. Refurbishment work in Hedge End is planned and priced by us, then carried out by automatic door engineers and glaziers working under our management. There is no charge for the survey, and you receive a fixed quote with each item priced separately, from new glass and rollers to seals, floor guides, the threshold and frame refinishing.

Can automatic doors be fitted to a listed building in Hedge End?

Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.

Is there a warranty on automatic door refurbishment?

Yes. The warranty terms for the equipment and the installation are set out in your written quote, so you can see exactly what is covered before you accept. Keeping the door serviced at the recommended intervals helps keep it in good order, and the quote explains any conditions that apply to the warranty.

Which building regulations apply to a new automatic entrance in Hedge End?

In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.

Next step

Automatic door refurbishment in Hedge End

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.