UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automatic door refurbishment · Greater London

Automatic door refurbishment in Uxbridge

A tired automatic door in Uxbridge does not always need replacing. New glass, rollers, floor guides, seals and a level threshold can make a sound door look and run properly again, after a free survey and a fixed, itemised quote.

Town
Uxbridge
Area
Greater London
Postcodes
UB8
Guide price
From £395 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Uxbridge and nearby

Our coverage of Uxbridge takes in the UB8 postcode district and the neighbouring parts of Greater London. If your address sits close to a boundary, it is still covered: send the postcode with your enquiry about automatic door refurbishment and we will confirm the arrangements and the price in writing.

Office entrances in Uxbridge commonly combine automatic doors with turnstiles, concierge desks and card access. When the operator is wired into those systems, staff pass through quickly, visitors are let in from reception and the building locks down outside working hours.

Nearby towns we also list for automatic door refurbishment (straight-line distance): Ruislip (3.0 miles), Hayes (3.4 miles), Gerrards Cross (4.1 miles), Chalfont St Peter (5.2 miles), Southall (5.5 miles), Slough (5.6 miles).

What to think about for automatic door refurbishment in Uxbridge

  • Listed buildings and conservation areas can limit changes to how the frame looks. Refurbishment within the existing frame usually avoids those issues and any need for consent.
  • Office blocks and business parks in Uxbridge with several matching doors can refurbish them together for a consistent finish and a lower cost per door.
  • Frames near the coast or busy roads can corrode faster. The survey checks fixings and the bottom of the frame, where water and grit tend to collect.
  • After refurbishment, sensors and speeds are reset to suit the new parts. Keep the test record with your service history so later engineers can see what was done.
  • Care settings in Uxbridge benefit from level thresholds and smooth-running leaves that do not snag walking frames, trolleys or wheelchair footplates as people pass through.

Automatic door refurbishment in Uxbridge: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £395 ex VAT.

ItemGuide priceNotes
Running gear refresh: rollers, guides, brushes and seals£395 – £895per door, ex VAT
Track overhaul£395 – £895per door, ex VAT
Replacement glass leaffrom £495each, ex VAT; size and glass type on survey
Full refurbishment of a sliding door£1,495 – £2,995running gear, seals, guides and one leaf, ex VAT

Standards and rules in England

Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.

Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.

How it works

  1. Describe what you need. Whether the job is automatic door refurbishment for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Uxbridge.
  2. Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
  3. Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
  4. Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.

Send us photos of the door that needs attention in Uxbridge, and we will arrange a survey at no cost and an itemised quote for the work.

Automatic door refurbishment in Uxbridge: questions

Do you refurbish automatic doors in Uxbridge?

Yes. Refurbishment work in Uxbridge is planned and priced by us, then carried out by automatic door engineers and glaziers working under our management. There is no charge for the survey, and you receive a fixed quote with each item priced separately, from new glass and rollers to seals, floor guides, the threshold and frame refinishing.

Can you give me a price for automatic door refurbishment in Uxbridge?

Our guide starts from £395 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Uxbridge confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Will our entrance in Uxbridge stay open during refurbishment?

Often, at least in part. Many jobs can be done one leaf at a time, and the work can be planned for quieter hours. If the entrance does need to close, the quote says for how long, so you can arrange another way in for staff and visitors.

Can you refinish the frame of our door in Uxbridge?

Yes. Aluminium frames can be cleaned, repaired and recoated on site to refresh their colour. Badly damaged sections may need replacing rather than refinishing. Refinishing is listed separately in the quote, so you can decide whether to include it now or leave it for a later phase.

What happens to the old door when a new one is fitted in Uxbridge?

If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.

What does the written quote for automatic door refurbishment in Uxbridge include?

The quote lists each item separately: the door or equipment, installation, electrical connections where we provide them, removal of anything being replaced, testing and handover. It is a fixed price for the work described, so it does not change unless the scope changes, and any change is agreed with you in writing first.

Do businesses in Uxbridge have to fit automatic doors?

No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.

Next step

Automatic door refurbishment in Uxbridge

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.